Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!
I did a brief search, and couldn't find anything definitive. What gauges should be set up on the AP, and what should their values read, to ensure the car's running like it should/safely?
So if I'm reading the second article right, if my OAR stays at -1, then the amount of knock that my car could be showing is well within normal parameters? also would that explain why I tend to get -1 or -2 timing if I don't give enough gas on start up and it shutters?
It's important to know when certain corrections happen. Timing corrections not under full throttle could be totally normal. Also, an infrequent small timing correction here or there under full throttle would be normal as well.
AFR
Boost
Cyl 1 Timing Correction
Charge Air Temp
ETC Angle (This is to see if my throttle is closing during a pull, which requires some tune adjusting)
When I'm doing any E-tuning I have about 20 parameters I require the customer to log, if you are looking to do any datalogging with your car I can share them with you.
So if I'm reading the second article right, if my OAR stays at -1, then the amount of knock that my car could be showing is well within normal parameters? also would that explain why I tend to get -1 or -2 timing if I don't give enough gas on start up and it shutters?
You shouldn't actually be giving it gas during startup, just put your foot on the clutch and press the start button and the starting sequence will handle the rest.
You shouldn't actually be giving it gas during startup, just put your foot on the clutch and press the start button and the starting sequence will handle the rest.
I have 6 parameters set on AP which after many logs I've settled on to just monitor some basics daily on AP...love Cobb's auto on/off feature they recently added
Boost
Cyl 1 Timing Correction
Cyl 3 Timing Correction
Charge Air Temp
Coolant Temp
Map Slot # (for switchable maps based on ethanol %)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.