• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!


I got roofied...

Messages
96
Likes
50
Location
NY
#1
After my fruitless search to find a suitable hitch mount rack for my bikes, I made the decision to use my employee discount from Thule on a roof rack!

I opted for the smaller, more traditional square bars instead of the newer aero style, as I wanted to use the fairing.


During the initial setup, aligning the bars and making sure the trays will sit level requires a bit of time, and on a car this size, it can be difficult to get the measurement right.







After aligning the load bars, it's important to test fit for bike position... luckily, I had a happy volunteer at hand. This bike isn't mine.







Once the carrier is positioned properly, the second carrier must be reversed so the arm is operable from the other side of the car. This required flipping the retaining mechanism and hook.



After you center and align your carriers, you can then install the fairing, which is designed to prevent wind noise and reduced economy.







Specs:

Thule LB50 Load Bars 50"
Thule Traverse 480 Foot Pack
Thule Fit Kit 1503
Thule Fairing 872XT 44"
Thule Sidearm 594XT x2
 


D1JL

7000 Post Club
Staff Member
Premium Account
U.S. Navy Veteran
Messages
7,831
Likes
4,072
Location
SFV, So.Cal.
#2
I have not seen such a great looking RACK as that,
since I went to a titty bar with some friends.




Dave
 


Messages
469
Likes
143
Location
Chicago
#4
Any increase in wind noise on the highway?

I had Thule square bars on a Tahoe and they howled.
 


OP
ItMightBePizza
Messages
96
Likes
50
Location
NY
Thread Starter #5
Not really no... A little bit of buffeting but nothing like howling
 


OP
ItMightBePizza
Messages
96
Likes
50
Location
NY
Thread Starter #8
I'm going on a road trip from nyc here to dc tomorrow, I will update with better data, but as it looks now I'm down at least 5mpg
 


OP
ItMightBePizza
Messages
96
Likes
50
Location
NY
Thread Starter #9
As for damage, the rack relies on friction to hold to the roof, but if the surface is perfectly clean out shouldn't be too bad
 


OP
ItMightBePizza
Messages
96
Likes
50
Location
NY
Thread Starter #11
I have never seen a major city empty like that.. I was in nw and it was like a ghost town


So far averaging about 28 mpg but still have to make the return trip
 


Messages
117
Likes
38
Location
Washington
#12
Any online vendors you'd recommend looking at to buy the racks? MPG drop doesn't sound too bad.
 


Messages
180
Likes
13
Location
Markham
#13
Any online vendors you'd recommend looking at to buy the racks? MPG drop doesn't sound too bad.
i got my set from e-trailer and got them shipped to the states (Free shipping)
from my research at the time, they had the cheapest for that set~
 


Messages
117
Likes
38
Location
Washington
#14
So I mounted mine last week. Slid them slightly forward since the bike rack called for a greater minimum distance than the towers were initially installed at. My fairing sits right off the windshield now. Is that too far forward and should I shift the whole thing back an inch or two (if possible), or am I okay with it being right there?
 


Messages
245
Likes
50
Location
NorCal
#15
So I mounted mine last week. Slid them slightly forward since the bike rack called for a greater minimum distance than the towers were initially installed at. My fairing sits right off the windshield now. Is that too far forward and should I shift the whole thing back an inch or two (if possible), or am I okay with it being right there?
Are your measurements per Thule specs? I wouldn't mess around too much with the placement as the measurements are pretty specific which I assume is the safest.



Any pics of where your fairing sits?
 


Messages
245
Likes
50
Location
NorCal
#17
I had to slide the front one forward because the 527 bike rack called for a longer minimum distance to fit on the bars.

http://i.imgur.com/Ol92pPI.jpg

http://i.imgur.com/mhjnUen.jpg
Thanks for the pics! Doesn't look too bad. At least the airflow would immediately hit the fairing. The minimum required distance not being met means that setup isn't recommended for our vehicles. I take it you can't open the hatch without hitting the rack (or is that why you moved the front bars instead of the rears?). I'm in the same boat. I have fork mounts as well.
 


Messages
117
Likes
38
Location
Washington
#18
Thanks for the pics! Doesn't look too bad. At least the airflow would immediately hit the fairing. The minimum required distance not being met means that setup isn't recommended for our vehicles. I take it you can't open the hatch without hitting the rack (or is that why you moved the front bars instead of the rears?). I'm in the same boat. I have fork mounts as well.
I can move the bars back a bit (maybe 1-1.5 inches) if I want to. Only reason I haven't is I've already placed those clear stickers on the roof for the felt pads to rest on.

Thanks for looking at the pics. Wasn't sure if I messed it up by having it that far forward.
 


caliboy15

Active member
Messages
577
Likes
89
Location
Houston
#19
how much dis you guys paid for the whole set-up?

I got a slightly used (same setup) for $500
 


Similar threads



Top