• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!


FSWERKS CBE owners?

Messages
199
Likes
19
Location
Port Hueneme
#1
Planning to order the FSWERKS CBE and I want to hear from anyone who has this CBE. I love the sound and the quality looks great. Anyone have any issues or concerns with this CBE? Any rubbing or issues with tip placement?
 


OP
M
Messages
199
Likes
19
Location
Port Hueneme
Thread Starter #3
Sounds great. Thanks for the link. Did you use the stock hangers or Cobb poly hangers?
 


OP
M
Messages
199
Likes
19
Location
Port Hueneme
Thread Starter #5
Awesome. Thanks for your help and feedback. Placing the order today.
 


Messages
180
Likes
32
Location
St. Peters
#6
My FSWERKS tips are about 1/2" from the bumper, but no problems. Fitment is good, spray your stock catback bolts with WD40 the day before and during removal. Only loud when you're on the throttle hard, otherwise just a good rumble. I used the stock hangers and don't have any issues yet after a couple thousand miles. Would definitely recommend.
 


OP
M
Messages
199
Likes
19
Location
Port Hueneme
Thread Starter #7
My FSWERKS tips are about 1/2" from the bumper, but no problems. Fitment is good, spray your stock catback bolts with WD40 the day before and during removal. Only loud when you're on the throttle hard, otherwise just a good rumble. I used the stock hangers and don't have any issues yet after a couple thousand miles. Would definitely recommend.
That's the info I wanted. Thanks guys for the info. Looking forward to the install.
 


Messages
153
Likes
20
Location
Chicago
#8
Love it. Install is super easy. And, it would be super easy to make it into a straight-pipe setup should you ever need that kind of flow.
 


Messages
12
Likes
0
Location
Sydney
#9
Don't mean to hijack, but does this catback match up perfectly to the Cobb downpipe? Or is some modification required? I noticed that in your sig [MENTION=1971]caliboy15[/MENTION]
 


OP
M
Messages
199
Likes
19
Location
Port Hueneme
Thread Starter #11
Installed the fswerks cbe today. Sounds great. No issues using the stock hangers. Pipe clearance was tight near the s pipe heat shield but no issues. Got a slight rub near the heat shield but bent it out of the way. Might install cobb hangers but not in a hurry. Looks great. Nice product FSWERKS! !!
 


Young L

Active member
Messages
524
Likes
88
Location
Richmond
#12
Installed the fswerks cbe today. Sounds great. No issues using the stock hangers. Pipe clearance was tight near the s pipe heat shield but no issues. Got a slight rub near the heat shield but bent it out of the way. Might install cobb hangers but not in a hurry. Looks great. Nice product FSWERKS! !!
still on the stock dp? If so any drone in the the 3-4k rpm range when just cruising, would be around 80mph.
 


OP
M
Messages
199
Likes
19
Location
Port Hueneme
Thread Starter #13
Still running stock dp. No drone while crusing. Haven't taken it on the freeway yet. Got up to 65 and had 0 drone.
 


Similar threads



Top