• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!


A Pillar fit and discoloration

Messages
181
Likes
32
Location
rosamond
#1
So shortly after I got my FiST I noticed that on the passenger side the a pillar moldings where crossed over each other instead of one going on top of the other like on the drivers side. I figured that it was just from assembly and I could get a trim tool in there and fix it. Unfortunately I realized that the pieces diverge from each other so that they cannot overlap properly and I am stuck with this poorly fitting molding I have to look at. On top of that both of my A-pillar moldings are changing color to this uneven grey which does not match the rest of the car. As if the design of the A-pillars was not shoddy enough already not I have a genuine fit and finish issue and discoloration on both that looks terrible. I would expect this sort of thing from a Soviet Volga I did not expect it from Ford in 2015. Will a ford dealership even acknowledge this as an issue or is their sense of quality so numbed from decades of american car industry decline that they will tell me its a common manufacturing defect and do nothing.

I shouldn't have to feel how cheap my car is every time I grab the inner door handle and feel the pieces separating in my hand. I love the way this car drives but at this rate the interior will be in shreds and the paint chipped and faded to nothing by the time I pay it off. Yes ford i did notice how you applied only half a coat and called it good.

My car still makes me feel special but its only 3 months old and the issues are piling up. I owned a MX-5 for 10 years and had less issues than I have had in 3 months with this Fiesta.
 


Messages
424
Likes
131
Location
Ridgecrest
#2
Take it to a dealership and find out. The door handle separating sounds like an issue I would want to get fixed. Mine is solid, so it can be done.

Sorry to hear you are having issues, maybe [MENTION=582]FordService[/MENTION] can help.
 


frankiefiesta

1000 Post Club
Messages
1,852
Likes
509
Location
forked river
#3
Cheap car problems. Take it to the dealer if they won't do anything about it get something that satisfies your standards
 


OP
MegaBuster
Messages
181
Likes
32
Location
rosamond
Thread Starter #4
This is that car that satisfies my driving standards. I just figured with a MSRP of 25k it shouldn't have the interior fit and finish that it does. Does the car being cheap make it ok that they put it together like this? Obviously the A-pillar is a manufacturing flaw.

is everyone having the A-pillar turning grey
 


frankiefiesta

1000 Post Club
Messages
1,852
Likes
509
Location
forked river
#5
This is that car that satisfies my driving standards. I just figured with a MSRP of 25k it shouldn't have the interior fit and finish that it does. Does the car being cheap make it ok that they put it together like this? Obviously the A-pillar is a manufacturing flaw.

is everyone having the A-pillar turning grey
I haven't noticed but just because your car was 25k doesn't mean they all are. If you picked recaros moonroof and nav that's another 3-4K. This is a fiesta at the end of the day. I got mine for 20k out the door (base) and it is what it is. Not trying to be a dick about it and I understand where you're coming from but you can't have Audi expectations on a car that's built off of a platform that starts at 15k
 


Messages
17
Likes
10
Location
Ypsilanti
#6
Warranty that FiST, I am sure that they will take care of it for you, the guy in the factory could of just had an off day mine is holding up well though.
 


Messages
322
Likes
49
Location
Grand Rapids
#7
Take it to the dealer. My headliner rattles like a rain stick. Drives me shat bit crazy. I'm taking it in. And they will fix it. I won't leave until they do.
 


Messages
429
Likes
65
Location
Dearborn
#8
So shortly after I got my FiST I noticed that on the passenger side the a pillar moldings where crossed over each other instead of one going on top of the other like on the drivers side. I figured that it was just from assembly and I could get a trim tool in there and fix it. Unfortunately I realized that the pieces diverge from each other so that they cannot overlap properly and I am stuck with this poorly fitting molding I have to look at. On top of that both of my A-pillar moldings are changing color to this uneven grey which does not match the rest of the car. As if the design of the A-pillars was not shoddy enough already not I have a genuine fit and finish issue and discoloration on both that looks terrible. I would expect this sort of thing from a Soviet Volga I did not expect it from Ford in 2015. Will a ford dealership even acknowledge this as an issue or is their sense of quality so numbed from decades of american car industry decline that they will tell me its a common manufacturing defect and do nothing.

I shouldn't have to feel how cheap my car is every time I grab the inner door handle and feel the pieces separating in my hand. I love the way this car drives but at this rate the interior will be in shreds and the paint chipped and faded to nothing by the time I pay it off. Yes ford i did notice how you applied only half a coat and called it good.

My car still makes me feel special but its only 3 months old and the issues are piling up. I owned a MX-5 for 10 years and had less issues than I have had in 3 months with this Fiesta.
Hey MegaBuster,

Thanks for posting about the issue you're experiencing. Send over a PM with your name, VIN, mileage, dealer, and best daytime phone number, and I'll look over some available resources on my end to see how I can assist.

Take it to a dealership and find out. The door handle separating sounds like an issue I would want to get fixed. Mine is solid, so it can be done.

Sorry to hear you are having issues, maybe [MENTION=582]FordService[/MENTION] can help.
Thanks for looping me in, Brick! :)

Take it to the dealer. My headliner rattles like a rain stick. Drives me shat bit crazy. I'm taking it in. And they will fix it. I won't leave until they do.
Hey FatGuyInALittleCar,

Please PM your name, VIN, mileage, dealer, and best daytime phone number; I'll look over some options on my end to see how I can help. Talk to you soon! :)

Nick
 


Similar threads

Ford Community Posts



Top