• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!


2014-2016 exhaust changes? or the same?

DaveG99

Active member
Messages
747
Likes
214
Location
Dallas
#1
Found a really good deal on a mbrp xp exhaust. Website says it's for a 2014. I have a 2016. Will it work? It should be the same right?
 


Dib

Member
Messages
172
Likes
123
Location
Tucson, AZ
#2
fwiw, I just installed a cobb turbo back on my 16 and everything worked fine
 


Messages
148
Likes
20
Location
NY
#5
Found a really good deal on a mbrp xp exhaust. Website says it's for a 2014. I have a 2016. Will it work? It should be the same right?
I wondered about the same, little while back.! Its same as 2014 and 15. As far I know only sync 3 and ECU(Tuning) is different on the 2016. I got the MBRP at a good deal, it fit great and sound good too.
 


OP
DaveG99

DaveG99

Active member
Messages
747
Likes
214
Location
Dallas
Thread Starter #6
I wondered about the same, little while back.! Its same as 2014 and 15. As far I know only sync 3 and ECU(Tuning) is different on the 2016. I got the MBRP at a good deal, it fit great and sound good too.
the intake is different on the 2016's. And the climate control issue on the 2016's is new. Im thinking exhaust is the same.
 


Messages
148
Likes
20
Location
NY
#7
the intake is different on the 2016's. And the climate control issue on the 2016's is new. Im thinking exhaust is the same.
Intake too? So so much nothing out for it?
 


Dib

Member
Messages
172
Likes
123
Location
Tucson, AZ
#8
Intake too? So so much nothing out for it?
from my limited experience the 16 has an additional vacuum line going to the intake, and there's a sensor on the PCV tube. and I'm getting a p2282 code with the cobb intake. but the dp/exhaust, intercooler and charge pipes fit fine.
 


Messages
148
Likes
20
Location
NY
#9
from my limited experience the 16 has an additional vacuum line going to the intake, and there's a sensor on the PCV tube. and I'm getting a p2282 code with the cobb intake. but the dp/exhaust, intercooler and charge pipes fit fine.
I am very new to this modding and stuff. I am currently thinking about getting the Mountune MP215 when they release it for the 2016.
Or get the CP-E intake(dont know if it fit or work with 2016). And Cobb accesses port V3.(cheaper than MP215 but void warrenty)

Any tips ot hint please feel free to tell me.

Sorry about my English, and how I word my self. I am a Norwegian living here in New York state.
 




Top