I installed my Bilstein Coilovers yesterday (standard Fiesta set, part# 47-167490). The fronts at the factory setting just barely had the smallest amount of preload on the springs. I had to raise the front anyway due to having taller 205/45r17 tires, but at the factory setting I was concerned the springs would be too loose at full droop. For the rear, I have the adjusters almost all the way lowered (~5 threads left above the collar) just to remove most of the rake compared to the front after adjusting the front up to stop the massive rub I was getting.
For those of you with these coilovers, what kind of height adjustments have you made?
For those of you with these coilovers, what kind of height adjustments have you made?