• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!


LED Resistor question

Messages
63
Likes
9
Location
Gainesville
#1
Hello all,

I have installed LED turn signals in the front and rear on my 16 FiST. I have a 6ohm resistor on the rears and no resistor up front. Still get a little hyperblink. Should I put a 6ohm on the fronts or drop all 4 corners to 3 ohm? Thanks in advance!
 


brbauer2

Active member
Messages
766
Likes
530
Location
St. Charles
#4
I had to do resistors at all 4 corners even with LEDs in the mirrors.

Sent from my ONEPLUS A3000 using Tapatalk
 


Messages
150
Likes
161
Location
Arlington
#9
Can anyone specify which wires are used for the resistor connections. I've searched and come up empty.
You can tap into the wiring harness that goes into the headlight assembly.
The wiring is:

Left turn - Blu-grn stripe
ground wires are black-yl stripe

Right turn - Yel-vt stripe
ground black-gy stripe

You just have to remember to mount the resisters to something, they get very hot.
 




Top