Maxton Design Spoiler Extensions

[Bames_207]

So I've got mine color matched and ready to go on.. I cant find any instruction manuals anywhere. Any advice would be great. I've attached a link to the extensions.

http://www.maxtondesign.co.uk/produ...-mk7-st--zetec-s-facelift-primer-painted.html

 

[DvC]

Shouldnt need instructions. Its pretty straightforward. You will need a heat gun and an extra set of hands.

 

[Bames_207]

Shouldnt need instructions. Its pretty straightforward. You will need a heat gun and an extra set of hands.

This may be a stupid question but... a heat gun on fiberglass?

 

[DvC]

You won't be holding it in one spot too long. You will need it to get to conform ro the cars contour. A couple of us had the issue where it was curved in a funny way as to not allow easy installation. If you have more questions, ask.

 

[mattyboh]

This may be a stupid question but... a heat gun on fiberglass?

[MENTION=3380]DvC[/MENTION] is probably thinking of the plastic spoiler extension.

http://www.maxtondesign.co.uk/product/fiesta-mk7-fl-2013-up/spoiler-extension-ford-fiesta-mk7-facelift-st--zetec-s-2013--.html

Not sure I've seen anyone running the fiberglass parts from Maxton.

 

[DvC]

Yeah just checked. I was thinking the abs one. Ignore me