• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!


Brura22's Long Overdue Molten Orange Fiesta ST Build

Brura22

Active member
Messages
579
Likes
145
Location
Clovis
#1
So, I planned on starting a build thread RIGHT when I purchased this vehicle.
But, I was so head over heels with driving and modding this thing that I never took the time to really type out and formulate a proper build thread!
Not gonna really start from the top, other than pics from the weekend I picked her up.

Shoutout to Ish for the front end inspiration!

2016 Molten Orange Fiesta ST w/ Recaro Package

Cobb - AP3 - RMM - Exhaust Hanger Kit - Front and Rear Anti-Sway Bars
Mountune - Catback Exhaust - Silicone Boost Hoses - Hi-Flow Charge Pipe - MRX Turbo Kit
Mishimoto - Oil Catch Can - Full Intake - J Line Intercooler
ATP - Catless Downpipe
BC Racing - BR Series Shocks
Fifteen52 - Rally White Tarmacs - Cup Spoilers
Boomba - Throttle Body Spacer - Oil Cap - Ultimate Shift Kit - Black Wing Risers
Pierce Motorsports - Rear Torsion Bar - Front Strut Brace - Lower 2 Point Brace
Snow Performance - Stage 2+ Water/Meth Injection w/ Dual Nozzle Injection
Luxeon - LED Fog Lights Housing
AirLift Performance - V2 Autopilot Air Management - 5 Gallon Stubby Tanks
Misc. Air Bags - Single Bellow Bag Over Coil Fronts - Firestone 7076 Sleeve Style Rears
Viair - 444c Stleath Black Single Compressor
Fender Braces - Black Window Rally Vents
Maxton Design - Carbon Rear Wing Extension
@Built_Boosted - Matte Black Front Splitter
Velossa Tech - Molten Orange Big Mouth Ram Air Intake
CPE Meth-Charge Pipe w/ HKS BOV
Boosted Designs - Dead Pedal w/ Rubber Grommets

First day I picked her up!


When I first got the Tarmacs!


ANNNNND FAST FORWARD A YEAR








 


jeff

2000 Post Club
Messages
2,309
Likes
3,220
Location
Evans
#2
Awesome build. Been following your MRX thread updates. Thanks for pioneering bro.
 


Messages
289
Likes
123
Location
Calgary
#3
Nice build! Did the mishi J line come in black or did you spray it yourself?
 


Messages
187
Likes
29
Location
Niwot
#6
Does the bottom of the mishimoto intercooler hang lower than the stock intercooler. Do you have to remove that air damn thing in order to install?
 


OP
Brura22

Brura22

Active member
Messages
579
Likes
145
Location
Clovis
Thread Starter #7
Does the bottom of the mishimoto intercooler hang lower than the stock intercooler. Do you have to remove that air damn thing in order to install?
Its not required to cut as much as I did...
Modbargains sells a direct fit bracket that allows you to pretty much retain all the bumper.
 


OP
Brura22

Brura22

Active member
Messages
579
Likes
145
Location
Clovis
Thread Starter #8
Attended New Mexico Desert Fest this weekend!

 


OP
Brura22

Brura22

Active member
Messages
579
Likes
145
Location
Clovis
Thread Starter #9
Fifteen52 Carbon Fiber flares coming in soon, and Borbet Type A 17x8.5 et 13's!

Get wideeeeeeee
 


OP
Brura22

Brura22

Active member
Messages
579
Likes
145
Location
Clovis
Thread Starter #10


Carbon Fiber [emoji7][emoji7]


Sent from my iPhone using Tapatalk
 


re-rx7

1000 Post Club
Messages
1,639
Likes
215
Location
Ardmore
#11
Looking gd. If you are in the Dallas area, I will take the Tarmacs off your hands when your ready to sell.
 


Messages
289
Likes
123
Location
Calgary
#15
Are you planning on painting them at all? I realize its carbon fiber but I'll be honest, not a big a fan of the carbon fiber flare on an orange car.
 


OP
Brura22

Brura22

Active member
Messages
579
Likes
145
Location
Clovis
Thread Starter #16
Looking gd. If you are in the Dallas area, I will take the Tarmacs off your hands when your ready to sell.
I'd do 400 cash if you want.
Cause they could use a good powder coat refinishing. Which would run around $350 for all 4 in Dallas.



Sent from my iPhone using Tapatalk
 


Messages
397
Likes
104
Location
YYC
#17
Are you planning on painting them at all? I realize its carbon fiber but I'll be honest, not a big a fan of the carbon fiber flare on an orange car.
No point buying the carbon fibre then ;) they are offered in FRP if you wanna paint them
 


OP
Brura22

Brura22

Active member
Messages
579
Likes
145
Location
Clovis
Thread Starter #18
Are you planning on painting them at all? I realize its carbon fiber but I'll be honest, not a big a fan of the carbon fiber flare on an orange car.
Staying CF. Actually looks amazing in person. Love the Orange and Carbon with the white.


Sent from my iPhone using Tapatalk
 


Similar threads



Top