Raised the shifter height 30mm. (Updated)
Here is what you'll need to raise the shifter.
You guys will figure everything out. Search for shifter removal steps.
Advise; Loosen the 2 torx screws from the shifter assembly to the base and push it forward as much as possible..
Have fun..
M6x1.00 30mm set screws.
M6 Standoff coupler 30mm
M6 Fender washers
Got the hardwares from browsing Ebay. It basically a standoff spacer. Might have to find something better. But so far haven't had any interference.
I always like the shifter closest to the steering wheel as much as possible. Like my e30.
Here is what you'll need to raise the shifter.
You guys will figure everything out. Search for shifter removal steps.
Advise; Loosen the 2 torx screws from the shifter assembly to the base and push it forward as much as possible..
Have fun..
M6x1.00 30mm set screws.
M6 Standoff coupler 30mm
M6 Fender washers
Got the hardwares from browsing Ebay. It basically a standoff spacer. Might have to find something better. But so far haven't had any interference.
I always like the shifter closest to the steering wheel as much as possible. Like my e30.
Last edited: