• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!


Slight Rubbing after new Pads/Rotors

dridge11

New Member
Messages
3
Likes
0
Location
Napa
#1
So we just replaced the pads and rotors on my 2014 FiST and bled the system afterwards. I hear the faintest rubbing sound from my front passenger wheel...not enough to get extra hot, smoke, smell, or keep the car from rolling in neutral, but enough to make that caliper and wheel dirty very quickly.

We realized that we forgot to grease the caliper slide pins, so we're going to get that done tomorrow. Anything else that could be causing this that we should check?
 


TyphoonFiST

9000 Post Club
Premium Account
Messages
11,513
Likes
8,007
Location
Rich-fizzield
#2
Check the Hardware....if it's not installed properly it will rub...ask me how I know...


Sent from my SM-N950U1 using Tapatalk
 


TyphoonFiST

9000 Post Club
Premium Account
Messages
11,513
Likes
8,007
Location
Rich-fizzield
#4
Had to take My brakes apart and fanageled and switched the clips and put it back together. Visually spun the rotor to verify the clips were not contacting the rotor. Drove vehicle to verify sound wasn't there...all good.


Sent from my SM-N950U1 using Tapatalk
 


Last edited:


Top