So I've picked up a Quaife LSD and figure while I've got things cracked open I would replace the flywheel and clutch. I'm looking at the Spec clutches, because that's pretty much the option. Now I'm trying to determine which clutch option is right for me, and I figured I would ask around. Have an X47R installed and am looking at meth in the future, so that's should give you guys an understanding of where I'm looking at power levels. I don't track the car, and really have no plans on doing so, and the most I really do is spirited mountain and hill driving with some gravel roads thrown in for good measure.
So bearing in mind that this is for the most part a street vehicle, what is going to give me the reliability and performance that I'm looking for in canyon carving while still give me a reasonable street vehicle at the same time, what would you folks suggest? I was looking at the Stg 3 currently, and was wondering if that would be the best bang for my buck. Looking forward to any answers or advice that can be given, thanks!
So bearing in mind that this is for the most part a street vehicle, what is going to give me the reliability and performance that I'm looking for in canyon carving while still give me a reasonable street vehicle at the same time, what would you folks suggest? I was looking at the Stg 3 currently, and was wondering if that would be the best bang for my buck. Looking forward to any answers or advice that can be given, thanks!