• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!


VTT X Panda Motorworks Cast Fiesta ST Turbo upgrade

Messages
36
Likes
57
Location
Hayward
#1
Hey guys, I am sure a lot of you remember the thread with a previous tuner about this turbo upgrade. Many people thought it was scrapped due to the falling out between us, and them. This is actually not the case, the project moved forward, but with a little less urgency as we had many new projects for upcoming platforms on our plate. The good news is two-fold, we have our production sample completed, and waiting to ship to us, and we have teamed up with the great guys over at Panda Motorworks for tuning, and distribution of our upcoming cast unit.

To refresh everyone's memory

The upgrade is as follows:
Complete new turbo casting. NOT rebuild from stock cores, nor factory-new units. All factory restrictions removed, upgrades to all factory internals removing many of the issues causing premature failures on hybrids, full 2" compressor inlet with matching brand new CAST 2" inlet elbow included with every turbo. Plug, and play, no changes needed to ANY plumbing, water, oil, or downpipe. NO Core charges, keep you stock core, sell it, put the car back to stock, etc. 100% stock appearing from the outside, have no issues passing dealership inspections. Every VTT turbo comes with a 1 year unlimited milage warranty.

Two options will be available.

Stage 2 good for around 300WHP (tuning / fuel dependent) Stock spool
Stage 2+ good for around 325-350WHP (tuning / fuel dependent) Stock spool

Specs: See wheel comparisons


Pricing:

Stage 2 with new actuator and inlet tube $1499 supports 300WHP
Stage 2+ with new actuator and inlet tube $1599 supports 325-350WHP

Here are a few pics, keep in mind a few things will change aesthetically, one being our logo, this was just a placeholder for the production sample.

The timeline is as follow. We should have the production sample in hand in about 2 weeks. It will be given to Panda for install, tuning, and abuse testing. Basically, I will ask him to try to break the turbo. This is the best way to approach sample testing, weed any possible issues before you go into full production. Once that is completed, and we are happy with everything. We will approve production. Takes about 60 days to get production units from there. In the meantime, we will update this thread with dyno results, logs, etc to keep everyone in the loop.

Just to nip it in the bud, we will not be addressing any issues with the past tuner, nor any issues they claim, etc. We have tried working with them twice, there are many reasons it did not work. All of them if boiled down you would be left with, we simply do not get along. If you have direct questions about the turbo, that or other issues. Drop us a DM, or email to Sales@vargasturbo.com. We will keep this thread, clean, and positive.

We are excited to see this product come to fruition finally!

Thanks! VTT Team

Fiesta ST Compressor Comparison Final_2.jpg
Fiesta ST Turbine Comparison.jpg
Shaft Comparison.jpg
VTT FIst 1.jpg
VTT FIst 3.jpg
VTT FIst 2.jpg
 


Last edited:

codestp202

Active member
Messages
500
Likes
136
Location
CA
#13
[MENTION=7953]VargasTurboTech[/MENTION] so when you guys get these in stock, will you be shipping them out of Hayward? / could we do pickup?
 


OP
VargasTurboTech
Messages
36
Likes
57
Location
Hayward
Thread Starter #14
[MENTION=7953]VargasTurboTech[/MENTION] so when you guys get these in stock, will you be shipping them out of Hayward? / could we do pickup?
Yessir, we have been in the same location in Hayward since 1978, we have expanded quite a bit to another building across the street, but our original shop is still used as our install center. We are happy to offer local pick up to our customers who are in the area!
 


Dpro

6000 Post Club
Messages
6,157
Likes
5,780
Location
Los Feliz (In the City of Angels)
#18
Yessir, we have been in the same location in Hayward since 1978, we have expanded quite a bit to another building across the street, but our original shop is still used as our install center. We are happy to offer local pick up to our customers who are in the area!
Got family in the bay grew up in Palo Alto. I could visit you. Lol
 


Similar threads



Top