Pads For Jackstands

[slopoke]

Thought I'd share what I built for my cars with pinchweld jacking points

I took a 4" X 4" 1/4" piece of mild steel, two 4" pieces of angle iron, 1 practice hockey puck split in two, two 4" pieces of 3/4" wood and built whats in the photos below.

I built them to have the pads rest on the body floor on either side of the pinch weld.

 

[arlisscm]

I did kinda the same thing, except I got some esco flat top jack stands and milled a 1/2" slot about three quaters of the way through some hockey pucks. Works quite well, pinch seam is still in perfect shape.