• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!


BEST Lug Nuts for TD 1.2's in 15x7???

Messages
48
Likes
2
Location
Northridge
#1
So my new wheel setup on my magnetic grey fist will be some anthracite TD 1.2's in 15x7. Do any other 1.2 wheel owners have lug nut suggestions? This is my first set of new wheels and I just want to know the best options out there. Any help would be appreciated :)
 


Capri to ST

1000 Post Club
Messages
1,602
Likes
1,980
Location
CHAPEL HILL, NC, USA
#4
Muteki sr35 non spline drive ones
I have the Muteki SR35's on my other car and like them a lot. I thought about getting them for my TD 1.2's but had one reservation. On another thread someone noted their package says the maximum torque allowed for them is 80 lb. ft., and our car requires 100 lb. ft.-
http://www.fiestastforum.com/forum/threads/13896-Muteki-lug-nut-torque

I'd be interested to hear from others who have used Muteki SR35's on TD 1.2's. A few folks on that thread have used them.
 


Messages
162
Likes
56
Location
Seattle
#5
+1 on the mcgard spline drive. I have the same kit. However, the only linked above is the 5 lug kit. They do make a 4 lug kit that is about 15 - 20 bucks cheaper.
 


anticon

Active member
Messages
602
Likes
525
Location
Sherwood
#8
I got the gorillas in my signature mainly based on a RAAMAudio recommendation. So far so good.
 


Capri to ST

1000 Post Club
Messages
1,602
Likes
1,980
Location
CHAPEL HILL, NC, USA
#9
I like my McGards. I got a kit that has enough nuts so you can choose to use locks or not.

https://smile.amazon.com/gp/product/B001P281RQ

I also have 1.2's in Anthracite. These blend in unless you look close.
I'm also thinking about the McGard spline drives, and am looking at these. For those that got them, did you feel it would be difficult to get a socket on regular lug nuts with the TD 1.2's, or would scratch up the lug recesses?-
http://www.mcgard.com/product/chrom...Ford&vehicle_model=Fiesta&vehicle_category=24
 


OP
S
Messages
48
Likes
2
Location
Northridge
Thread Starter #10
UPDATE:

so I placed my order for my 1.2’s. Just need to decide on lugs. I want Mcgards but I’m still confused on part numbers. I believe for our cars we need M12x1.5. But some of the part numbers on the lug nut thread don’t seem to fit the fiST when I pull them up on amazon? Can someone just post some links of ones that truly fit the fiST?
 


OP
S
Messages
48
Likes
2
Location
Northridge
Thread Starter #12

Similar threads



Top