Hello Everyone,
My name is Roger and I've been meaning to do a build thread for a while now, but unfortunately I haven't for really no reason, lol. So, I am starting now with this thread to let you know a little bit about my hobbies and my progress so far with my FiST. I will keep the original post updated from this point on.
About my hobbies:
I'm gonna keep this fairly simple and just show pics of my cars and a couple other interests of mine. Of course, first and foremost, my faith and family come first.
-My Toys:
Me on the Honda
2014 Fiesta ST aka Knuckles
2014 Ford Fiesta ST
Race Red
Tinted Windows
Motegi MR125's (17x7.5, 42mm offset) with 215/ 40 R17's
Wilwood Front BBK from 2JR
Cobb Accessport with a Tune+ tune by Adam (E30/ 93 E10)
MA Performance Intake
mountune intercooler
mountune charge pipe/ hose upgrade
mountune lowering springs
mountune quick shift kit
boomba RMM/ roll resistor
boomba racing short throw shifter
boomba racing transmission and shifter base bushings
Turbosmart BOV and IWA
boomba racing wing riser kit
2JR "race" downpipe
MBRP cat-back
CFM oil cap vent filter/ valve
Pierce Motorsports strut tower brace
Mishimoto OCC kit
Zeitronix ethanol content analyzer (ECA-2 kit)
Redline Goods shifter boot and armrest cover
Active Shift Designs Accelerator Pedal Spacer
Dead Hook Motorsports shifter extension
AMSOIL Signature Series 5w-30 engine oil
Mutol trans and brake fluid
Also, here are some walk around/ rev/ conservative pull(s) videos. It was a little cold outside. I was not texting and driving. Just turning the GoPro off.
http://youtu.be/x7UM0ZrMQpg
http://youtu.be/OToT-MHPGBI
http://youtu.be/ytez9kxWDVs
http://youtu.be/28eJ-GNRbOg
Other than that, I look forward to keeping this updated. Let me know what you think and/ or if you have any questions about anything here, just ask. Thanks!
20150124 update...video of under the hood, lol
http://youtu.be/BwOjIK0T-mA
20150201 update...pictures of Knuckles from today's North Florida ST. meet
20150206 update: added the CFM oil cap vent filer and boomba RMM.
Write up for my Moroso Air / Oil separator:
http://www.fiestastforum.com/forum/showpost.php?p=51777
Zeitronix ECA-2 install:
http://www.fiestastforum.com/forum/showpost.php?p=57446
20150214 update: Traded the borla catback with another member for his MBRP catback, installed my Dead Hook Motorsports Shifter Extension and installed my Active Shift Design's Accelerator Pedal Lift Spacer. Also, here are a few videos of the MBRP (w/ 2JR race downpipe) and the Dead Hook Motorsports Shifter extension in action!
http://youtu.be/H3krwMYLRyE
http://youtu.be/5YwjVTYuhS8
http://youtu.be/JNILYU2FltE
http://youtu.be/LDFSXAcp5EU
20150215 update:
MFT screen ;-).
20151127 update:
Since my last update, the FiST is now running a Tune+ E30 and 93 E10 tune set up. I installed a Turbosmart BOV, MA Performance intake, Mishimoto OCC kit and a Wilwood Front Brake kit from 2JR and mountune rear pads and Stop Tech lines.
My name is Roger and I've been meaning to do a build thread for a while now, but unfortunately I haven't for really no reason, lol. So, I am starting now with this thread to let you know a little bit about my hobbies and my progress so far with my FiST. I will keep the original post updated from this point on.
About my hobbies:
I'm gonna keep this fairly simple and just show pics of my cars and a couple other interests of mine. Of course, first and foremost, my faith and family come first.
-My Toys:
Me on the Honda
2014 Fiesta ST aka Knuckles
2014 Ford Fiesta ST
Race Red
Tinted Windows
Motegi MR125's (17x7.5, 42mm offset) with 215/ 40 R17's
Wilwood Front BBK from 2JR
Cobb Accessport with a Tune+ tune by Adam (E30/ 93 E10)
MA Performance Intake
mountune intercooler
mountune charge pipe/ hose upgrade
mountune lowering springs
mountune quick shift kit
boomba RMM/ roll resistor
boomba racing short throw shifter
boomba racing transmission and shifter base bushings
Turbosmart BOV and IWA
boomba racing wing riser kit
2JR "race" downpipe
MBRP cat-back
CFM oil cap vent filter/ valve
Pierce Motorsports strut tower brace
Mishimoto OCC kit
Zeitronix ethanol content analyzer (ECA-2 kit)
Redline Goods shifter boot and armrest cover
Active Shift Designs Accelerator Pedal Spacer
Dead Hook Motorsports shifter extension
AMSOIL Signature Series 5w-30 engine oil
Mutol trans and brake fluid
Also, here are some walk around/ rev/ conservative pull(s) videos. It was a little cold outside. I was not texting and driving. Just turning the GoPro off.
http://youtu.be/x7UM0ZrMQpg
http://youtu.be/OToT-MHPGBI
http://youtu.be/ytez9kxWDVs
http://youtu.be/28eJ-GNRbOg
Other than that, I look forward to keeping this updated. Let me know what you think and/ or if you have any questions about anything here, just ask. Thanks!
20150124 update...video of under the hood, lol
http://youtu.be/BwOjIK0T-mA
20150201 update...pictures of Knuckles from today's North Florida ST. meet
20150206 update: added the CFM oil cap vent filer and boomba RMM.
Write up for my Moroso Air / Oil separator:
http://www.fiestastforum.com/forum/showpost.php?p=51777
Zeitronix ECA-2 install:
http://www.fiestastforum.com/forum/showpost.php?p=57446
20150214 update: Traded the borla catback with another member for his MBRP catback, installed my Dead Hook Motorsports Shifter Extension and installed my Active Shift Design's Accelerator Pedal Lift Spacer. Also, here are a few videos of the MBRP (w/ 2JR race downpipe) and the Dead Hook Motorsports Shifter extension in action!
http://youtu.be/H3krwMYLRyE
http://youtu.be/5YwjVTYuhS8
http://youtu.be/JNILYU2FltE
http://youtu.be/LDFSXAcp5EU
20150215 update:
MFT screen ;-).
20151127 update:
Since my last update, the FiST is now running a Tune+ E30 and 93 E10 tune set up. I installed a Turbosmart BOV, MA Performance intake, Mishimoto OCC kit and a Wilwood Front Brake kit from 2JR and mountune rear pads and Stop Tech lines.
Attachments
-
420.2 KB Views: 188
-
391.5 KB Views: 192
-
321 KB Views: 193
-
72.9 KB Views: 196
-
54.5 KB Views: 177
-
106.5 KB Views: 194
-
355.4 KB Views: 759