Evening gents. Two days ago during mildly spirited driving my check engine light came on, code P144C.
Equipped applicable mods:
CPE intake using Whoosh 2016 adapter (installed about 9 months ago)
Damond OCC w/ Vent to atmosphere option (installed about 3 months ago)
About 2 weeks ago I started possibly smelling oil on lift off so I guessed the OCC might be full.
1 week ago I drained the OCC, it had less than 1 OZ of fluid (so not full at all).
For troubleshooting I am guessing I need to double check that the drain is fully closed on the OCC. If the cleared code comes back what do you all think my next step should be? By guess I could plumb out the OCC pretty easily. Do you recommend cleaning the 3 check valves in the setup with some alcohol?
Thanks for reading.
Equipped applicable mods:
CPE intake using Whoosh 2016 adapter (installed about 9 months ago)
Damond OCC w/ Vent to atmosphere option (installed about 3 months ago)
About 2 weeks ago I started possibly smelling oil on lift off so I guessed the OCC might be full.
1 week ago I drained the OCC, it had less than 1 OZ of fluid (so not full at all).
For troubleshooting I am guessing I need to double check that the drain is fully closed on the OCC. If the cleared code comes back what do you all think my next step should be? By guess I could plumb out the OCC pretty easily. Do you recommend cleaning the 3 check valves in the setup with some alcohol?
Thanks for reading.