Hello and welcome to our Fiesta ST Forum community! Is this your first visit?
Register

See the top rated post in this thread. Click here

User Tag List

Page 7 of 7 FirstFirst 1234567
Results 61 to 64 of 64
  1. #61
    New Member
    0%
    Rate Transaction

    Medals
     
    Join Date
    May 2018
    City
    Vero Beach
    State
    FL
    Country
    United States
    Posts
    58
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Likes Received
    3


    Guest-only advertisement. Register or Log In now!
    In plain English, is there a cheap solution to increase boost by a bit?

    And how much can the boost be increased on a totally stock ST, without the ECU triggering all kinds of error codes?
    If I can just install some valve (spring or other mod) of a few tens of dollars, without a tune, and gain even +1PSI extra without a tune, it would be worth it (I hope).

    I understand running higher pressure can destroy the Turbo.
    I'm barely ever taking my car over 4k RPM anyway.
    I just love the turbo kicking in, when I surpass the 2.5k RPM. And usually pull it to 3.5-4k RPM before shifting. Occasionally 4.5k RPM.
    I don't see myself changing that.
    Adding a few PSI of boost, will hopefully add to the acceleration effect around that RPM range.

  2. #62
    Senior Member 775 Rep Points TyphoonFiST's Avatar
    Ratings | Rate Transaction

    Medals
    Earned First 5 Rep Points Earned First 25 Rep Points Earned First 75 Rep Points Earned First 100 Rep Points  
    Join Date
    Aug 2015
    City
    Blaine
    State
    MN
    Country
    United States
    Posts
    2,889
    Mentioned
    33 Post(s)
    Tagged
    1 Thread(s)
    Likes Received
    775


    Not worth it....just go buy an accessport... use an OTS cobb tune or get a flash tune by Dizzy tuning or Stratified....end of story...you're in the performance game here....you have to pay to play or in the end you will pay more for trying to be Frugal.

    Sent from my SM-N950U1 using Tapatalk
    Is this your bush? Are you king of the forest?

  3. #63
    New Member 12 Rep Points
    0%
    Rate Transaction

    Medals
    Earned First 5 Rep Points  
    Join Date
    Feb 2016
    City
    West Palm Beach
    State
    FL
    Country
    United States
    Posts
    66
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Likes Received
    12


    1 Likes

    A Turbo Transformer is the only thing I can think of that adds about 2 psi of boost without the use of the AP
    and doesn't throw any engine codes. That is one of the first mods i did thinking that would be enough.
    That didn't last long before the bug bit and I wanted more.
    It also cost $200 so you would be better off just saving up for an AP new or used and using the cobb tunes or getting a Dizzy/Stratified tune.
    COBB AP W/Stratified 93 tune
    Depo Racing IC
    Whoosh hot side pipe
    GFB - DV+
    Modified stock airbox w\MAF spacer & K&N filter
    MTC intake tube
    Turbo Transformer
    AWR/RMM = 70a
    Pierce Motorsports 2 PT front & rear bar
    NGK 6510 plugs
    Resonator delete
    Symposer delete

  4. #64
    Senior Member 191 Rep Points
    0%
    Rate Transaction

    Medals
    Earned First 5 Rep Points Earned First 25 Rep Points Earned First 75 Rep Points Earned First 100 Rep Points  
    Join Date
    Feb 2018
    City
    Tigard
    State
    OR
    Country
    United States
    Posts
    1,177
    Mentioned
    6 Post(s)
    Tagged
    0 Thread(s)
    Likes Received
    191


    1 Likes

    Guest-only advertisement. Register or Log In now!
    Quote Originally Posted by MeeLee View Post
    In plain English, is there a cheap solution to increase boost by a bit?

    And how much can the boost be increased on a totally stock ST, without the ECU triggering all kinds of error codes?
    If I can just install some valve (spring or other mod) of a few tens of dollars, without a tune, and gain even +1PSI extra without a tune, it would be worth it (I hope).

    I understand running higher pressure can destroy the Turbo.
    I'm barely ever taking my car over 4k RPM anyway.
    I just love the turbo kicking in, when I surpass the 2.5k RPM. And usually pull it to 3.5-4k RPM before shifting. Occasionally 4.5k RPM.
    I don't see myself changing that.
    Adding a few PSI of boost, will hopefully add to the acceleration effect around that RPM range.
    If really all you want is is a little more boost you can go for a Flowmaster Delta Module but I agree that getting a used AP is the better way to go, and use a simple and safe included Stage 1 tune. It really unlocks natural torque of the engine and makes it more fun to drive.
    '17 Magnetic, wheels/calipers - New Feb, '18. Dizzy V2 93/e30 - schmoove daily tune, Stratified V4.0 - 91,93 STuned traction, Torque Solutions 75a RMM, Mojo Mfg short shift kit, drop-in filter w/cold air shroud cutout.

    FYI - 92 octane e10 pump premium is very close to if not 93 octane, start with a 93 tune or you're leaving free power on the table over running 91 tunes.


 
Page 7 of 7 FirstFirst 1234567

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •