• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!


turbo drain pipe

Messages
409
Likes
271
Location
Jacksonville
#1
After spending more time than I should installing my new MRX turbo, I am stumped over the oil drain line out of the turbo. How do you fit it over the studs with the gasket in place? it seems impossible
 


wetwea33

Active member
Messages
634
Likes
494
Location
langhorne
#2
After spending more time than I should installing my new MRX turbo, I am stumped over the oil drain line out of the turbo. How do you fit it over the studs with the gasket in place? it seems impossible
You have to take the bottom out of the block first.

Sent from my SM-G975U using Tapatalk
 


slopoke

Active member
Messages
644
Likes
634
Location
Livermore
#3
Loosen the exhaust manifold nuts to where you have lots of movement of the entire turbo assembly. Install the line on the turbo first, torque the bolts, then install the bottom into the engine block. It should be a lot easier to install this way. At least it's the technique that I use.
 


TDavis

1000 Post Club
Messages
1,435
Likes
1,149
Location
Columbia
#4
You have to take the bottom out of the block first.

Sent from my SM-G975U using Tapatalk
This is what I did. I had to have one of my friends hold the turbo attached to the exhaust manifold, had them suspend it away from the engine block while I guided the drain pipe into the block while it was attached to the turbo.
 




Top