• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!


TTR Engine and trans mount install

Messages
15
Likes
4
Location
Boston
#1
Hello FiST Forum. Looking for someone with access to Fords manuals for the specific torque specs on a 16 fist pass side engine mount and trans mount please. TTR only provides the torque for their bolts not Fords. I have the rmm already in just want to complete the set today
 


jeff

2000 Post Club
Messages
2,309
Likes
3,222
Location
Evans
#2
Hello FiST Forum. Looking for someone with access to Fords manuals for the specific torque specs on a 16 fist pass side engine mount and trans mount please. TTR only provides the torque for their bolts not Fords. I have the rmm already in just want to complete the set today
Here's the entire manual:

https://www.dropbox.com/s/s7wts7x85s2yu9e/2014 Fiesta.zip?dl=0

PASSENGERS SIDE
3 closest to engine are 80Nm
3 others are 48Nm

DRIVERS SIDE
18mm large bolts are 125nm
15mm are 89nm

Check out this thread if you don't want to deal with finding it in the manual:

http://www.fiestastforum.com/forum/threads/14411-Powerflex-Motor-Mount-Inserts?highlight=inserts

Good luck.
 


OP
S
Messages
15
Likes
4
Location
Boston
Thread Starter #3
Appreciate it greatly thanks for the response
 


Messages
101
Likes
54
Location
Cherry Hill, NJ
#4
Here's the entire manual:

https://www.dropbox.com/s/s7wts7x85s2yu9e/2014 Fiesta.zip?dl=0

PASSENGERS SIDE
3 closest to engine are 80Nm
3 others are 48Nm

DRIVERS SIDE
18mm large bolts are 125nm
15mm are 89nm

Check out this thread if you don't want to deal with finding it in the manual:

http://www.fiestastforum.com/forum/threads/14411-Powerflex-Motor-Mount-Inserts?highlight=inserts

Good luck.
Do you happen to know the torque spec of the bolt going into the passenger mount? I bought an ARP bolt to replace it and will need to torque that one down as well.


Sent from my iPhone using Tapatalk
 


jeff

2000 Post Club
Messages
2,309
Likes
3,222
Location
Evans
#5
Do you happen to know the torque spec of the bolt going into the passenger mount? I bought an ARP bolt to replace it and will need to torque that one down as well.

Sent from my iPhone using Tapatalk
Passenger side engine mount:
Middle Bolt 50 ft/lbs
Mount to Motor 59 ft/lbs
Mount to Body 35 ft/lbs

Helpful info/install pics here:

https://www.fiestastforum.com/threads/arp-motor-mount-bolt-install-from-whoosh.17305/
 


Messages
101
Likes
54
Location
Cherry Hill, NJ
#6

Similar threads



Top