I am on stock Springs and have never ever had clearance issues with my 6-point brace. The lowest point is in between the tires so it's very unrealistic for it to scrape except for maybe on a very severe jolt and bottoming out of the suspension. Speed bump and curbs and driveways, Etc are a complete non issue. I have had mine on for probably over 20,000 miles and it doesn't have a scratch on it.
my install was very easy as well. I did not have any hole alignment issues. It took me longer to get the car on 4 jack stands than it did to install the part LOL. My only issue was torquing the lower control arm bolts. On jack stands there just wasn't enough room for proper leverage. I had to put the car on ramps to get it higher off the ground.
Sent from my SM-G950U using Tapatalk
my install was very easy as well. I did not have any hole alignment issues. It took me longer to get the car on 4 jack stands than it did to install the part LOL. My only issue was torquing the lower control arm bolts. On jack stands there just wasn't enough room for proper leverage. I had to put the car on ramps to get it higher off the ground.
Sent from my SM-G950U using Tapatalk