• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!


Installed a uniden dash camera.

Messages
106
Likes
6
Location
Summerville
#1
Hello. I think I’m in the right section? Today I installed a uniden front facing dash camera in a 2016 Fiesta ST. I ran the wiring cable through the headliner. Started at the rear view mirror & ran the wiring cable to the left & down. I noticed the headliner has a slight gap in it. Enough of a gap that the wiring sometimes will fall out on the top section. Then has to be put back up. Does anyone know if there is any solution to this ? A way to securely hold the wiring in the headliner without it having the potential to fall out ? Thanks for any advice.
 


OP
E
Messages
106
Likes
6
Location
Summerville
Thread Starter #2
Hello again. Also the wiring was ran over to the passenger side not to the left side.
 


OP
E
Messages
106
Likes
6
Location
Summerville
Thread Starter #3
I ordered the street guardian 3M cord clips from amazon. I think this will work. But so far the power cable hasn’t fallen down.
 




Top