Anyone been able to contact Gold Coast?

[robt712]

I have their front and rear BBK that I bought from a member here. The rear rotors were making some noise so I emailed Gold Coast from their website and never received a response. Thankfully, I was able to get the rotors I had cut but know at some point in the future I will need replacements and would like a definite way to get ahold of them. A phone number is not listed on their website.

 

[D1JL]

Mark has had some family medical issues.
Just in case.
Both the front and rear rotors are available off the shelf from standard cars.
You will only need to drill the new hub pattern in them and you already have the jig.

 

[robt712]

I have read that the front rotors are RX8 and the rears are Focus RS but have not seen that verified by anyone at Gold Coast. Being able to get in touch with them would help me confirm what I have read. I’d also be more than willing to pay them the $50 rotor drilling charge to make sure I don’t junk a set of rotors lol

 

[D1JL]

I helped design both these kits with Mark at Gold Coast.
I am the one that picked what rotors to use.
Since Gold Coast has no other employees, I am your best bet.
I also did all the testing of these kits.

So YES, the fronts are RX8 and the rears are Focus RS.
You can also check out this thread.

https://www.fiestastforum.com/threads/big-brake-kits-using-oem-calipers.17161/

BTW: I still have one new each of these kits at my home.

 

[kivnul]

Do you know if Marks situation has improved? I hadn’t seen this tread prior to the 16th when I ordered new front rotors from him. Haven’t heard a peep since then.

 

[D1JL]

I have tried privet phone and email with no luck so I fear the worst but hope I am wrong.
I will have to drive out to his place and see for sure.

For those in need, remember the rotors are "Off the Shelf".
I have written PDF instructions on how to easily re-drill them.
Please contact me by PM if needed.

 

[Woods247]

I certainly hope he’s well and all is ok.