That little piece of conduit there is suppose to be covering the elbow of your vac line to protect against abrasion wear from that line running by it. That conduit had slid down to the bottom of the hose up against the brake booster. (I moved it back.)
If it slides down again, (which it probably will,) I'll see if I might get away with lightly securing with something...
EDIT 23y07m15d21h50m41s: Do not tie or glue that conduit. Simply extend it by adding more conduit so that it can't slide down.
This is available on Amazon. You'll need to determine the appropriate diameter. Should be able to stand up to engine bay temps.
.
If it slides down again, (which it probably will,) I'll see if I might get away with lightly securing with something...
EDIT 23y07m15d21h50m41s: Do not tie or glue that conduit. Simply extend it by adding more conduit so that it can't slide down.
This is available on Amazon. You'll need to determine the appropriate diameter. Should be able to stand up to engine bay temps.
.
Last edited:
