Latest Activity
-
Okay I know plenty of us have swift springs. I installed mine based on the stickers reading right side up and the tigther coils on top... -
-
SSteveS replied to the thread Clutch to Floor.Note, regarding Zorm's comment, that you don't just want to bleed the system. You want to flush and replace the fluid. The pedal...
-
Mmadhatter replied to the thread Headed to the Tail of the Dragon...any suggestions?.A few. i live not too far from there, and hike/vacation in the area 8-10 times a year. Have done the skyway also. Lots of great roads...
-
TyphoonFiST replied to the thread What did you do to your Fiesta ST today ?.Think OEM but better* Yes they do dust..But then you know they are working.[driving] -
Blue is what I use both street and track. They’re very good. It’s been so many years since I had OEM pads that I couldn’t compare the...
-
TyphoonFiST replied to the thread P0480 and P0217 codes.Clear them and see if they come back.
-
Maybe the timing was slightly off when the timing belt was changed?
-
I know this is old but I was doing some wishlist mod shopping and vents are up there... I think with a simple 3d printer it would...
-
Had muffler man swap exhausts on my fiestas, putting the stock exhausts back where they belong. Half hour and 400 bucks I’d say not bad... -
Finally got around to installing the RSB I picked up from @WannabeST recently. Removed the DNA adjustable bar for now. Don’t mind...
-
dhminer replied to the thread What did you do to your Fiesta ST today ?.Blue is what I use both street and track. They’re very good. It’s been so many years since I had OEM pads that I couldn’t compare the...
-
Zormecteon replied to the thread Clutch to Floor.Bleed all you want, but it's time to replace the slave cylinder. Call Whoosh to see if they can get the RTS CSC slave. which has been... -
M-Sport fan replied to the thread Clutch to Floor.There is a 'spillway' hose coming off of the single reservoir which goes directly to the clutch master cylinder, completely bypassing... -
Flushing the fluid will definitely give an improvement. I took the car to the dealer and had them flush and refill both the clutch and...
-
felopr replied to the thread What did you do to your Fiesta ST today ?.how you guys feel about ebc blues? same dusty as yellow? would you consider the initial bite the same on and off feeling of the oem s... -
Well... I was going to use this for a tomorrow post but since we got evening thunderstorms I couldn't detail the car before my cruise of... -
Capri to ST liked madhatter's post in the thread Headed to the Tail of the Dragon...any suggestions?.make sure the car is in good nick. brakes, brake fluid, tires, etc all freshened. Also, don't expect a free run. count on getting stuck... -
Caliper Slide Mounts - The Permanent Fix https://www.fiestastforum.com/threads/caliper-slide-mounts-the-permanent-fix.29023/ -
Important rear pad removal and installation notes: * To push the piston caliper back, turn the wind back tool clockwise. * Watch the...
-
dhminer replied to the thread Gauging interest in a run of budget big brake kit brackets?.For anyone interested, brand new calipers from FPC Euro came in at $1,253 out the door
-
Block is ready for sleeves. Small issue with a bend in one of the sleeves, so they couldn't be installed. SP63 working with the... -
SSteveS replied to the thread Clutch to Floor.Flushing the fluid will definitely give an improvement. I took the car to the dealer and had them flush and refill both the clutch and...
-
SThat generally means the clutch slave cylinder has gone bad. To replace it, you have to drop the transmission so before doing that you...
-
Mmadhatter replied to the thread Clutch to Floor.if you've got a vacuum bleeder you can do it solo. otherwise, prob. a 2 man job.
-
Mmadhatter replied to the thread Headed to the Tail of the Dragon...any suggestions?.make sure the car is in good nick. brakes, brake fluid, tires, etc all freshened. Also, don't expect a free run. count on getting stuck...
