Latest Activity
-
Capri to ST replied to the thread PSA for your nuts..I have and like those also. https://www.amazon.com/dp/B00200BF84?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3 -
For lug nuts, I’ve been having really good luck with McGard “spline drive” nuts. They have a captive washer that once torqued with a...
-
Mounted the x9s -
Pedal spacer install coming up this weekend, see if I can get those heel toes a bit better.... 3/4" or roughly 20mm to start
-
I think it would be easier to remove the lense and then paint the housing... There are euro headlights with black housing but no DRL...
-
Have the codes read and report back.
-
I owned a Sonic blue 2004 SVT Focus for 12 years (bought it brand new). I kept it NA but modded it quite a bit. The FiST is an order of...
-
I did a bit of research into this - Unfortunately the B-Spec ABS module is only compatible with 2013 and older Fiestas that have an...
-
There were a handful of modes to select and we went with the option that disabled it all but left ABS on. ESC button doesn’t do...
-
ESC is definitely still on, but consider it muted. Like I said earlier, the nannies never completely turn off until the ABS fuse is removed.
-
the LSPI can and should be mitigated by not trying to accelerate hard from very low rpms - thats why it is even more common to see the...
-
Currently using Costco 5w-30 full synth - change every 5k, all good. Last time I paid $24-ish for 10 quarts of it, since it was on...
-
M-Sport fan replied to the thread The "Official" WRC thread.Yeah, I've already commented on many of his videos, and yes, I tend to agree with him on his loathing of space frames for Rally 1 (and...
-
This guy has fantastic stuff all on rally, He's just getting started on Youtube, give him a subscribe and like if you, umm, like it. :)...
-
M-Sport fan liked Dusterbd13's post in the thread FiST full of dollars: GRM $2000 challenge and motorsports build.Nope. Apparently legal in pa, but not nc. And it sucks at night. 15x7 205 50 15
-
M-Sport fan replied to the thread PSA for your nuts..^^^TRUE on any of the factory wheels, but some aftermarket wheels state 80 or 90 lb. ft. for their specific wheels. Since I only own...
-
They are stainless here's the link https://a.co/d/akLJ94d -
Intuit replied to the thread What did you do to your Fiesta ST today ?.Those look nice. Don't appear to have the 'gap' on the inner-circumference of traditional clamps? They stainless? -
Installed Whoosh v3 intercooler, silicone pipes and Amazon t bolt clamps. Don't understand why anyone would use cheap screw clamps when...
-
Intuit replied to the thread Wiring diagram for 2019 Ford Fiesta SE.Sometimes the little membrane or pop-button switches fail in remotes, resulting with false activations. Pull the battery on all of your...
-
Intuit replied to the thread Wiring diagram for 2019 Ford Fiesta SE.Read the trouble codes from the various modules including BCM and report. Unexpected results can occur with aftermarket additions...
-
Intuit replied to the thread Hot side pipe rubbing on ac line.AC lines (especially the high pressure side) can see a lot of pressure and temperature variation. I'd want to minimize flexing and...
-
Intuit replied to the thread Wipers don't return to rest position.Have the codes read and report back.
-
Please nobody listen to this. Torque spec for the axle nuts is 188ft lbs or 255nm.
-
This is the correct value. Several uggahduggahs from an impact gun can easily exceed 250fl-lbs. in addition the axle nuts are a type of...