Latest Activity
-
Intuit replied to the thread TPMS light..If the sensors are indeed synchronized, the TPMS light could be related to something else and will need to read the code. -
Yeah, I have enjoyed it much more since the symposer delete. Still makes enough cabin sounds without the fakery. -
KKTB replied to the thread oil leaks found and repaired.(shifter Tower).I just tried the linked 69mm fluorine (Viton) o-ring, and it's too loose as well. Going to try one that's 68mm OD, 64mm ID, 2mm width...
-
Mmadhatter replied to the thread Timing Belt off a doll hair, What would you do?.did you run the calibration at the end of the procedure? After completing the repairs, perform the Misfire Monitor Neutral Profile...
-
I finally got my garage cleaned up enough to fit my car. -
Capri to ST liked JSWhaler's post in the thread best brake setup for 15´s rim prio autocross and a few trackdays.If its for autox, I've never had issues with OEM rotors and OEM pads (the performance ones) along with SS brake lines and quality DOT 4... -
JSWhaler replied to the thread best brake setup for 15´s rim prio autocross and a few trackdays.If its for autox, I've never had issues with OEM rotors and OEM pads (the performance ones) along with SS brake lines and quality DOT 4... -
You raise a good point. The vacuum pump delete is not without controversy. People have been doing it with the FoST/FoRS platforms for... -
Just for fun - had Ron at Whoosh make me a gel badge for the engine cover...
-
SI finally got my garage cleaned up enough to fit my car.
-
I finally got my garage cleaned up enough to fit my car.
-
M-Sport fan replied to the thread Woods247 BrokeFiST Build.If I remember correctly, Phil's wife weighed one for me by request and she said 16.8 lbs for our spec 17x8. -
Phil's also offers them in a 15x8 ET35, but not in the very popular for this car, 16" sizes.
-
You raise a good point. The vacuum pump delete is not without controversy. People have been doing it with the FoST/FoRS platforms for... -
Just for fun - had Ron at Whoosh make me a gel badge for the engine cover...
-
2014 1.6L Fiesta ST Mod List Block/Engine New short block – Panda built stage 2 Fiesta ST Short Block with parts from Panda Motorworks...
-
M-Sport fan liked arlisscm's post in the thread (Possibly) Blew a head gasket looking for suggestions.For the time being I'm staying maxed out on 93 on the S280, so ~300whp. I do want to run e30 or e50 one day, not looking for anything...
-
SSTHeart replied to the thread Mr. Spam's Street and SCCA Autocross build (modified).Just for fun - had Ron at Whoosh make me a gel badge for the engine cover...
-
-
Stupidbutt liked STRemy's post in the thread My Fake ST Build(Swap finished, Wrap finished) buttoning up now..Don't pay attention to the bird crap or that bug splatter. I'll get it cleaned up, get the roof channels and new windshield modeling... -
Stupidbutt liked STRemy's post in the thread My Fake ST Build(Swap finished, Wrap finished) buttoning up now..Think i spent 10 hrs on that rear bumper cover. Broke it completely down. Wrapped all the bits separately. Idk how many separate pieces...
-
SPhil's also offers them in a 15x8 ET35, but not in the very popular for this car, 16" sizes.
-
arlisscm replied to the thread (Possibly) Blew a head gasket looking for suggestions.For the time being I'm staying maxed out on 93 on the S280, so ~300whp. I do want to run e30 or e50 one day, not looking for anything... -
M-Sport fan replied to the thread Woods247 BrokeFiST Build.Phil's also offers them in a 15x8 ET35, but not in the very popular for this car, 16" sizes.
-
arlisscm liked M-Sport fan's post in the thread (Possibly) Blew a head gasket looking for suggestions.You are not going to be wanting for every single pony or 'torques' at the wheels with that setup, given it's possible head room for...
-
M-Sport fan replied to the thread (Possibly) Blew a head gasket looking for suggestions.You are not going to be wanting for every single pony or 'torques' at the wheels with that setup, given it's possible head room for...
