Latest Activity
-
Fusion Works replied to the thread Sway Bar.BS. That was a car with sloppy lowering spring and some big balloony 16in tires combined with a driver that didn't know how to drive... -
arlisscm replied to the thread (Possibly) Blew a head gasket looking for suggestions.Other than oil in the exhaust (which will eventually burn off) it doesn't appear to of hurt anything else aside from itself and the... -
Oooh a new contender to the Beyblade X World Championship 2026? I feel with you, so much work only for another part to fail. Hurts...
-
Found this in my downpipe. Apparently my s280 exploded. Suspect my downpipe is cooked as well, I can probably get all the oil out, but... -
daloonie replied to the thread (Possibly) Blew a head gasket looking for suggestions.Oooh a new contender to the Beyblade X World Championship 2026? I feel with you, so much work only for another part to fail. Hurts...
-
daloonie liked Fusion Works's post in the thread Really Should Stop Modifying my Daily Driver into a Track Car.Unfortunately the weekend wasn't a great success (even though I was comfortable with the car). Hung a tire off and bent the shit out of...
-
daloonie liked Fusion Works's post in the thread Really Should Stop Modifying my Daily Driver into a Track Car.Built the new rear beam. I can get the car low while still maintaining the OEM type measurements while still lowering the the car. I...
-
Fusion Works replied to the thread Really Should Stop Modifying my Daily Driver into a Track Car.Unfortunately the weekend wasn't a great success (even though I was comfortable with the car). Hung a tire off and bent the shit out of...
-
-
Fusion Works replied to the thread Really Should Stop Modifying my Daily Driver into a Track Car.Currently (and this past weekend), the ride heights as measure to the fender well openings was 23.5in front and 22.5 rear. The car is...
-
-
Fusion Works replied to the thread Really Should Stop Modifying my Daily Driver into a Track Car.Built the new rear beam. I can get the car low while still maintaining the OEM type measurements while still lowering the the car. I...
-
-
GManaged to damage the locking tab on the MAF connector. Hit Pick and Pull and scored a connector, base Fiesta not ST. Connector is the...
-
SSteveS replied to the thread First and reverse gear noise after repairing slave cylinder, clutch and flywheel.Is it when you have the clutch pedal partially depressed? Sounds like a throwout bearing maybe.
-
TyphoonFiST replied to the thread Fuel pump driver module location.I wanna say it was F24* -
M-Sport fan liked Fusion Works's post in the thread Time Trial/Time Attack March 28-29 Talledega Gran Prix Raceway Bring your car out.Welp, Ya'll missed out on FANTASTIC event. TVR SCCA and AL region both worked together to put on an awesome event. Lots of new faces... -
I gapped and installed some step colder spark plugs, also cleaned the neg terminal on my battery as it had some corrosion forming. You...
-
Fusion Works replied to the thread Time Trial/Time Attack March 28-29 Talledega Gran Prix Raceway Bring your car out.Welp, Ya'll missed out on FANTASTIC event. TVR SCCA and AL region both worked together to put on an awesome event. Lots of new faces...
-
Master Blaster -
XanRules replied to the thread DIY Upholstery?.https://www.fiestastforum.com/threads/what-did-you-do-to-your-fiesta-st-today.1441/post-527811 -
These cars act weird when anything electrical is messed with without disconnecting the negative side of the battery (A/C won't turn on... -
SSam4 replied to the thread Radiator Fan Woes.What’s the next logical step here? On/Off toggle switch. Power the fan when you need to...I assume you can't really drive the car as is.
-
LilPartyBox replied to the thread FS Crashed my 2018 and have extra parts dont need for new car.Do you have the side skirts? -
These are the suspension changes which were reported for the 2016 models- A rear twist-beam with 27 per cent more roll-stiffness and a...
-
how did you removed the "fake" rear grille? Is it possibile to do it without removing the entire bumper?
-
arlisscm replied to the thread (Possibly) Blew a head gasket looking for suggestions.Found this in my downpipe. Apparently my s280 exploded. Suspect my downpipe is cooked as well, I can probably get all the oil out, but...
-
