Latest Activity
-
The intake tube. Due to time constraints I've allowed too many hands in the engine bay. -
Had an issue with the car throwing a CEL then dying on track Sunday after a great full day Saturday. Codes P0245, P025a, P0443, P26BD...
-
I did raise mine only because I'm on super sports and I have a splitter, so getting the jack and wood under engine is a squeeze... -
Intuit replied to the thread Radiator Fan Woes.I don't believe that is a common issue for the '17 model year. Activation temp for the fan varies and is also set at a very high... -
-
Intuit replied to the thread Amp Wiring - Do I Have This Right?.Open the driver door and pull the lower-left kick-panel on the inside and you'll find a convenient spot for running the power wire...
-
SSteveS replied to the thread What did you do to your Fiesta ST today ?.What better to do on a sunny Easter evening after a big dinner than put the brand new summer tires on! Brand new RPF1's and ECS02's.
-
-
If they used higher rate linear springs which could allow for even close to factory ride height on the adjustable collars, it would also... -
"While in there" can get you in trouble lol I always end up with full race spec under that guise... That being said the rear perches are...
-
You need a jack and a block of wood to support the engine and trans but don’t need to raise the car at all -
dhminer replied to the thread What did you do to your Fiesta ST today ?.You need a jack and a block of wood to support the engine and trans but don’t need to raise the car at all -
M-Sport fan replied to the thread What did you do to your Fiesta ST today ?.^^^Can these be done without using a jack/jackstands?
-
Finally got around to installing the Vibra mounts, why didn't I do this sooner?! Immediate difference and so freaking smooth at idle...
-
When I went to replace the radiator tank and shift it out of the way it started dripping, so pretty likely it wasn’t sealing. Once it...
-
Good track day at Sonoma, but a bit mixed on the car. Second to last session outside air temp was pushing 90F, the car started...
-
M-Sport fan replied to the thread Elektric problem Fiesta ST JD3 modell yer 2006.Most of the members on here reside in North America and we were never blessed with the earlier model, Mk6, Fiesta STs. Maybe some of...
-
I know I'm replying to an older post but I've done something similar to this on multiple Jeep XJs for both cooler intake air and moving...
-
"While in there" can get you in trouble lol I always end up with full race spec under that guise... That being said the rear perches are...
-
Good track day at Sonoma, but a bit mixed on the car. Second to last session outside air temp was pushing 90F, the car started... -
SSam4 replied to the thread What did you do to your Fiesta ST today ?.have you looked at this? https://whooshmotorsports.com/products/2016-fiesta-st-evap-purge-p144c-check-engine-light-fix I have an...
-
arlisscm replied to the thread (Possibly) Blew a head gasket looking for suggestions.Not that I have seen. -
arlisscm liked M-Sport fan's post in the thread (Possibly) Blew a head gasket looking for suggestions.Does anyone offer billet impeller/shaft snails for our application, regardless of $$$$$?
-
I have seen billet wheels for KP39 turbos but I think those were listed for VW, not sure what the difference is
-
Fusion Works replied to the thread ISO Kosei K1.Thats the easy part. -
Hub size is different also. You'd need a centering ring IIRC.
-
M-Sport fan replied to the thread OEM-Ish Equipment... What are my options?.If they used higher rate linear springs which could allow for even close to factory ride height on the adjustable collars, it would also...
