Latest Activity
-
arlisscm replied to the thread Motive Power Bleeder 1108 vs 1118 reservoir caps.Bled my clutch earlier, got some pictures of the adapter, reservoir, and the pressure I usually run. Did confirm there is only one... -
-
Aatikovi replied to the thread Unable to Pull Vacuum on Cooling System (RESOLVED).Having the same issue. This adapter would work...
-
XanRules replied to the thread Amp Wiring - Do I Have This Right?.I am finally going to - maybe - start diving into this over the next few weekends and it is so wild to me that nobody has made a... -
SSteveS replied to the thread Michelin Pilot Sport 5s vs Dunlop Direzza.The Direzza Z3 was a 200TW tire. The PS5 is a Max Performance category tire, not as high. If you had the old DZ102 the PS5 might be...
-
arlisscm replied to the thread Oil Pump Drive Belt.No problem, had to double check when the mk8 released in the UK because apparently the 1.5L does use an oil pump drive belt.
-
Thanks for the reply and, breakdown picture! I just had it my head that the pump was a belt TBH im so glad its not!
-
SSteveS replied to the thread Any Ideas on this knocking noise?.Just so you know, it's spelled axle. Axel was Guns 'N Roses. I just listened to your video at work where my computer can go a lot...
-
The 1.6L doesn't use a oil pump drive belt. The oil pump is driven directly by the crankshaft. -
arlisscm replied to the thread Oil Pump Drive Belt.The 1.6L doesn't use a oil pump drive belt. The oil pump is driven directly by the crankshaft.
-
-
Fiesta ST Smog Experience (modded but passed) Just went through smog and figured I’d share what worked. Usually run E blend, but... -
daloonie replied to the thread Feisty the "Family Car".My experience is 215/45/16 is not a common size here in Europe either. But that size fits like a glove on those beautiful Königs(yes I...
-
Trials and tribulations of having chosen 16x8” wheels! Tried mounting some Conti ECS2 as street tires. Unfortunately while 205/45R16...
-
fST replied to the thread MARYLAND 'spotted' thread!!.everyone's on FB groups these days. -
arlisscm replied to the thread Motive Power Bleeder 1108 vs 1118 reservoir caps.Didn't end up getting to use mine today. But I'm wondering in the years since I got mine if they have changed the adapter/gasket design...
-
I asked them as well. The PS4 and PS5 simply aren’t being made in this size. Basically it seems like the 215/45R16 PS3 still exists... -
A bad motor mount will be evident in the engine moving a lot while revving. A loose nut or bolt will be evident by putting a wrench on...
-
M-Sport fan liked arlisscm's post in the thread (Possibly) Blew a head gasket looking for suggestions.Still tinkering away sorting out small installs, clean up stuff. Should have it back running this weekend. Main hurdle at the moment is...
-
M-Sport fan replied to the thread Feisty the "Family Car".I wonder if they ever made those PS3s in a 215/40-17 size for when my 200 TW Yok AD09s wear out? [dunno] Both Michelin and Tire Rack...
-
Trials and tribulations of having chosen 16x8” wheels! Tried mounting some Conti ECS2 as street tires. Unfortunately while 205/45R16...
-
Capri to ST replied to the thread What did you do to your Fiesta ST today ?.Guess it worked...:cool:
-
Installed Dizzy stage 2 tune.... immediately receive a speeding ticket.
-
arlisscm replied to the thread Motive Power Bleeder 1108 vs 1118 reservoir caps.No problem, I'm also not 100% sure I didn't cram both gaskets in. haha. This was back in 2017. I'll be using it again later today to...
-
yeah good idea re: brake fluid to help it seal. will give that a go later...might also try 3d printing an additional thin gasket to push...
-
arlisscm replied to the thread Motive Power Bleeder 1108 vs 1118 reservoir caps.Correct, it doesn't have the little stop-pieces on the tabs like the real cap, so you can rotate too far. You can kind of feel when it...
-
arlisscm replied to the thread Motive Power Bleeder 1108 vs 1118 reservoir caps.Yeah, I was skeptical at first as well, but you just need to push down a little and make sure the tabs on the adapter are all the way up...
