Latest Activity
-
That's a fantastic price. My 2015 was $7,000 without any of those extras. I'm jealous! (But I did get Recaros so I guess that's worth... -
Thanks for the warm welcome! I paid $7k for the car which included the current all season setup, a 200tw track wheel & tire set up and a...
-
Hi all, Happy to join the FiST community with my new to me 14' Race Red Fiesta. A bit of backstory on my acquisition of this car. I...
-
M-Sport fan liked arlisscm's post in the thread (Possibly) Blew a head gasket looking for suggestions.
-
M-Sport fan replied to the thread Acceleration grip for autocross.Will the AP allow you to install ONLY their traction control, without also fully installing one of their numbered 'stage', canned tunes?
-
It seems like the smaller the rolling diameter, the higher end of that you want to be. Once you get tires over 26-27” rolling diameter...
-
arlisscm replied to the thread Track Brake Pad Recommendations.Pictures aren't great as it's a tough spot to get pictures of, but here's my setup for the routing. Trick is to have the big zip tie... -
-
arlisscm replied to the thread (Possibly) Blew a head gasket looking for suggestions.
-
-
HAHAFiST replied to the thread (SOLVED)Brake Switch issues ( no brake lights).Reviving. I this has happened to be for the second time So annoying. I'm assuming switch qualty is just garbage but I don't see accounts... -
Just bought a 2019 st. Love it so far, but am truly clueless with the platform. I don't want to post a bunch of dumb questions, but... -
Tiberius1701 replied to the thread Weird noise coming from the front right low, only when the car is cold.Very common front (passenger side) engine mount, when they wear out they will creak, especially when temps are cold, you can spray some...
-
If all goes well with my first startup of my new engine this afternoon, I should be putting the face back on the car and hooking my... -
arlisscm replied to the thread Track Brake Pad Recommendations.If all goes well with my first startup of my new engine this afternoon, I should be putting the face back on the car and hooking my...
-
BY ALL MEANS, make sure you keep that hose away from the CV axle boots. My cobbled together setup slipped after the last event and I...
-
I’m considering a set of these to replace the stock dust shields: https://worfabrications.com/products/brake-ducting-shield
-
I run them with my Wilwood setup, just needed to trim them slightly for caliper clearance. Seem to work just fine. I have 2 rectangular...
-
Fusion Works replied to the thread Track Brake Pad Recommendations.BY ALL MEANS, make sure you keep that hose away from the CV axle boots. My cobbled together setup slipped after the last event and I...
-
SHi all, Happy to join the FiST community with my new to me 14' Race Red Fiesta. A bit of backstory on my acquisition of this car. I...
-
arlisscm replied to the thread Track Brake Pad Recommendations.I run them with my Wilwood setup, just needed to trim them slightly for caliper clearance. Seem to work just fine. I have 2 rectangular...
-
They are way better than nothing, but they are a little on the small side in my opinion, but I made 3in inlets from the foglight holes.
-
I’m considering a set of these to replace the stock dust shields: https://worfabrications.com/products/brake-ducting-shield
-
It seems like the smaller the rolling diameter, the higher end of that you want to be. Once you get tires over 26-27” rolling diameter... -
It seems like the smaller the rolling diameter, the higher end of that you want to be. Once you get tires over 26-27” rolling diameter...
-
Fusion Works replied to the thread Feisty the "Family Car".Maybe
-
Fusion Works replied to the thread Track Brake Pad Recommendations.They are way better than nothing, but they are a little on the small side in my opinion, but I made 3in inlets from the foglight holes.
