Tweeter polarity check

[akiraproject24]

Installing JL Audio C1 up front. Good news, tweeter snaps right into the factory mounting spot tightly, no mods.

But as I prepare to wire in the inline high-pass filter, I'm worried about polarity.

There's a green/orange and gray/orange. I can see these come from the woofer harness. I'm using a metra adapter that plugs into the factory tweeter harness. I may have to change polarity. Anyone know which is which?

 

[akiraproject24]

I'm running home to grab my meter to check now

 

[Grsemky]

Try this thread;

https://www.fiestastforum.com/threads/tweeters-wiring-diagrams.22813/

 

[akiraproject24]

Polarity was correct to the metra adapters and inline high-pass filter

Green/orange
Gray/orange

Crutchfield doesn't list these adapters as working with the factory tweeter harness but they do. Posting part number photo below and happy to report the tweeters that come with the JL Audio C1 650, snaps right into the factory mounting area, no brackets screws or glue needed.

 

[akiraproject24]

Try this thread;

https://www.fiestastforum.com/threads/tweeters-wiring-diagrams.22813/

Nice! I've only done driver side front and both rears so far. This will have me ready to go on the passenger front without checking polarity.