1552 Chicane lug nuts

[Trev0222]

I recently got a set of 1552 Chicanes and the lug nuts I have will not allow the lug cover to fit properly. Does anyone have recommendations on lug nuts that will fit under the lug cover on these wheels? I tried the Gorilla lugs from CJ pony parts and the stock lugs and neither work.

 

[NATYPE]

I will be forever grateful to whoever answers this question with a nice, direct product link lol. My factory lug nuts almost let them sit flush, but every other option I've tried has the covers poking out just a bit. I wonder if we just need to run some open ended nuts etc. for minimum interference.

 

[TyphoonFiST]

Try these .....

Dorman 711-306 Wheel Nut Chrome Bulge M12-1.50 Compatible with Select Models, 4 Pack https://www.amazon.com/dp/B000IZ2Y42/ref=cm_sw_r_apan_i_C0F3ZYK75EDZH0TRK153

Or these


KSP M12X1.5 Open End Wheel Lug Nuts, 3/4"（19mm） Hex 0.84”(21mm) Height Conical Seat 60 Degre Chrome Finish (Include Other M12X1.5 Wheel) Pack 20 pcs https://www.amazon.com/dp/B07KQ5MXPC/ref=cm_sw_r_apan_i_93GRF9RVG488VW7AB3DB?_encoding=UTF8&psc=1

Sent from my SM-N975U1 using Tapatalk

 

[dhminer]

I have Chicanes. I use these and they’re perfectly flush.

Gorilla Automotive 20033SD Acorn Open End Chrome Small Diameter Lugs (12mm x 1.50 Thread Size) https://www.amazon.com/dp/B001O0CCLA/ref=cm_sw_r_cp_api_i_N7K22ZCWSBFC7RJDYP2Q?_encoding=UTF8&psc=1

 

[NATYPE]

I have Chicanes. I use these and they’re perfectly flush.

Gorilla Automotive 20033SD Acorn Open End Chrome Small Diameter Lugs (12mm x 1.50 Thread Size) https://www.amazon.com/dp/B001O0CCLA/ref=cm_sw_r_cp_api_i_N7K22ZCWSBFC7RJDYP2Q?_encoding=UTF8&psc=1

Those are looking good to me! Ordered.

 

[TyphoonFiST]

Those are looking good to me! Ordered.

Have fun when the shitty tin pot metal tool breaks....ask me how I know * plus if someone wants to take your wheels...they pound sockets around those nuts. Good luck doing that with Mcgards stuff.

These are the Best in the Industry....the tool WON'T BREAK * plus it's low profile

https://shop.mcgard.com/products/au...12-x-1-5-thread-size-set-of-4-locks-and-1-key

Sent from my SM-N975U1 using Tapatalk

 

[NATYPE]

Have fun when the shitty tin pot metal tool breaks....ask me how I know * plus if someone wants to take your wheels...they pound sockets around those nuts. Good luck doing that with Mcgards stuff.

These are the Best in the Industry....the tool WON'T BREAK * plus it's low profile

https://shop.mcgard.com/products/au...12-x-1-5-thread-size-set-of-4-locks-and-1-key

I'll gladly take all the insight hahaa, cancelling and getting those. Appreciate it!