So coming from the mazdaspeed world, I thought I had a pretty good idea what to watch, but after a little reading, and then flashing the stage 0 map the sheer number of things to monitor is amazing. Takes like a whole minute to scroll down to the bottom of the list. I used to monitor boost, AFR, injector duty cycle, knock retard, long term/short term fuel trims, and sometimes intake temps or throttle position. I think there were like 6 different KR options to watch.
My car is stock, 2014 with over 90k miles. I purchased a custom 93 and E30 tune from dizzy, but would like to monitor the car in its' "near stock" mode. How long does the car take to learn? What values are most important to monitor as far as the health of the car?
I haven't performed a compression or leakdown test because it's 100 degrees outside and I'm lazy.
My car is stock, 2014 with over 90k miles. I purchased a custom 93 and E30 tune from dizzy, but would like to monitor the car in its' "near stock" mode. How long does the car take to learn? What values are most important to monitor as far as the health of the car?
I haven't performed a compression or leakdown test because it's 100 degrees outside and I'm lazy.