Auxbeam LED bulbs

Member ID
#8028
Messages
85
Likes
35
Just installed these the other night. Driver's side went in perfectly and the passenger's was a little tight as everyone says but I didn't have to remove anything to make it work. I just needed to wiggle it around a bunch to line it up right and push a little harder than you'd expect and it popped right in to place.

Like others, I also had to dial the headlights waaayyyy down as their natural focus was much too high, almost in the same place as my highbeams when on. They definitely are not a replacement for a real native HID projector setup, but they're better than the OEM Edison bulbs.
 


Member ID
#8033
Messages
322
Likes
322
I forgot, the driveway is on quite an incline so the car is nowhere near level, I'll need to take new pictures of how I have it leveled now on flat ground.
 


TyphoonFiST

9000 Post Club
Premium Account
Member ID
#3304
Messages
11,846
Likes
8,304
As long as they are H11 ...you will be good to go!

Sent from my SM-N950U1 using Tapatalk
 


TyphoonFiST

9000 Post Club
Premium Account
Member ID
#3304
Messages
11,846
Likes
8,304
Nope Techmax Gen 1* Fit like a glove..Gen 2s are bigger and don't fit well or at all.
 


Member ID
#15807
Messages
17
Likes
12
Nope Techmax Gen 1* Fit like a glove..Gen 2s are bigger and don't fit well or at all.
Do you happen to have a direct link? I’d like to
Order them today but want to make sure I get the correct ones. Just got my 18 st last week and it’s quite a bit less helpful at night than the LED’s from my Merc C43. Thank you for the help!
 


TyphoonFiST

9000 Post Club
Premium Account
Member ID
#3304
Messages
11,846
Likes
8,304
Member ID
#15807
Messages
17
Likes
12

Magnetic

Active member
Member ID
#4236
Messages
682
Likes
645
Good sir, you have made my day!!! This forum has been amazing. I had a mustang for 9 years and the forums were never as informative or helpful as this one. Thanks again and have a great weekend!!
I just ordered these right now too! Can't wait to get them on tomorrow. For $35 it's worth it even if they dont work out.

@TyphoonFiST how are you liking these?

Next I'll need to upgrade the whimpy horns on the FiST. If anyone has any suggestions let me know.
 


Member ID
#15807
Messages
17
Likes
12
I just ordered these right now too! Can't wait to get them on tomorrow. For $35 it's worth it even if they dont work out.

@TyphoonFiST how are you liking these?

Next I'll need to upgrade the whimpy horns on the FiST. If anyone has any suggestions let me know.
I was thinking the exact same thing!! Have you done your foglights? I wanna upgrade them as well to match.
 


Magnetic

Active member
Member ID
#4236
Messages
682
Likes
645
I was thinking the exact same thing!! Have you done your foglights? I wanna upgrade them as well to match.
I haven't done the fog lights yet but @ron@whoosh has a nice Diode Dynamics led kit that I'm highly considering after my chassis upgrades are done. I'm not familiar with them but they seem legit. I actually didnt touch my FiST for 3 years so I'm sorta outta the game for whats out there but if they're on the site I'm sure they have his approval. The fogs it came with (and headlights) are trash so they're on the list for upgrade. I really whish there was a plug and play option for headlights.
 


TyphoonFiST

9000 Post Club
Premium Account
Member ID
#3304
Messages
11,846
Likes
8,304
I just ordered these right now too! Can't wait to get them on tomorrow. For $35 it's worth it even if they dont work out.

@TyphoonFiST how are you liking these?

Next I'll need to upgrade the whimpy horns on the FiST. If anyone has any suggestions let me know.
They were the best out of the 4 different vendors I had utilized until I got a custom set of retrofits that I utilize currently.

Sent from my SM-N975U1 using Tapatalk
 


Magnetic

Active member
Member ID
#4236
Messages
682
Likes
645
They were the best out of the 4 different vendors I had utilized until I got a custom set of retrofits that I utilize currently.

Sent from my SM-N975U1 using Tapatalk
Heck yeah!!

Did you have to mod the retrofits yourself or is there a manufacturer that ships em plug and play? (I don't want to be soldering wires and etc and don't mind paying a bit extra)
 


TyphoonFiST

9000 Post Club
Premium Account
Member ID
#3304
Messages
11,846
Likes
8,304
Heck yeah!!

Did you have to mod the retrofits yourself or is there a manufacturer that ships em plug and play? (I don't want to be soldering wires and etc and don't mind paying a bit extra)
I had entire assemblies done with Halos and HIDs projectors installed into them by a vendor here on the forum Northern lights. Not sure if he is doing them anymore....cant hurt to check.

Sent from my SM-N975U1 using Tapatalk
 


Magnetic

Active member
Member ID
#4236
Messages
682
Likes
645
I had entire assemblies done with Halos and HIDs projectors installed into them by a vendor here on the forum Northern lights. Not sure if he is doing them anymore....cant hurt to check.

Sent from my SM-N975U1 using Tapatalk
Any leads on the contractor would be GREATLY appreciated!
 


Magnetic

Active member
Member ID
#4236
Messages
682
Likes
645
I was thinking the exact same thing!! Have you done your foglights? I wanna upgrade them as well to match.
Did your bulbs also get delayed at "South Gate"? I haven't received mine. Says there's a shipping delay.
 




Top