• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!

FS Bizzareos garage sale!

Trader history for Bizzareo (0)

Messages
60
Likes
20
Location
Manchester
#21
The photos are not working, any chance you can re-upload the ones for the GTX2860r housing? I assume this is the turbine housing, curious as to what the downpipe flange adapter is, I'm assuming you just mean the housing is designed for our stock downpipe? And is $250 your asking price?
 
OP
B
Messages
286
Likes
55
Location
Ottawa
Thread Starter #22
Hmm strange. Links probably broke after the edit.

Its the housing for the stock manifold +IWG and the adapter you need for a stock 3 bolt style downpipe as I had eveything V banded when I changed housings for my manifold.

250 is my asking price, a core should be between 1100 and 1400 USD depending on where you source it.

Photo below, ignore the hot side pipe as its sold.
 

Attachments

Messages
60
Likes
20
Location
Manchester
#23
Thank you for that! Super enticing...sorry to be a tease, but I will have to think about this over the weekend before making a decision. If I don't snag it, GLWS!

EDIT: Any chance you know what else I would need to fit this on my car (apart from a core obviously)...from what I've seen I would need a hot side pipe and to fit a BOV somewhere, but that's all right? If you don't know no worries! Thanks again.
 
OP
B
Messages
286
Likes
55
Location
Ottawa
Thread Starter #24
Thank you for that! Super enticing...sorry to be a tease, but I will have to think about this over the weekend before making a decision. If I don't snag it, GLWS!

EDIT: Any chance you know what else I would need to fit this on my car (apart from a core obviously)...from what I've seen I would need a hot side pipe and to fit a BOV somewhere, but that's all right? If you don't know no worries! Thanks again.
So you would need a BOV. You can order a BOV and flange and have it welded to your intercooler, or get the CPE / MAP cold side kit. I would get one with a tial flange as you have more options.

You will also need some silicon piping as I think the length of the hot side pipe changes a little, the turbo lines (oil feed etc) ATP sells a kit (I swear I've seen it cheaper elsewhere), and a turbo fire ring is a good idea at the same time (20 bucks or so).

I'm flexible on price.
 


Top