Coikover install camber alignment help?

Member ID
#8109
Messages
22
Likes
1
#1
Hey so i just recently installed bc coikovers and it i got some negative camber while doing so ,i took it to get align and they said they cant fix the camber so i figured the only way is through the camber plate up too ,is this correct or they were just lazy?
 


green_henry

1000 Post Club
Member ID
#7801
Messages
1,049
Likes
786
#2
Negative camber is a good thing as long as it's not excessive. How much camber do you have?
 


jeffreylyon

1000 Post Club
Premium Account
Member ID
#4448
Messages
1,323
Likes
1,117
#3
You can use some camber bolts. The BC's don't have an adjustable upper bearing plate?
 


OP
T
Member ID
#8109
Messages
22
Likes
1
Thread Starter #4
I believe it is at -2.7 degress the car dosent drive straight at the moment the camber is noticebal do i have to adjust this with the camber plates or the akignment shop shoukd have been able to do it ? Or thats why i have the camber plates on the coikovers beacuse if i drop down the strut to adjust the camber then ill misalign it all again which is fine but in turn i wont know if the camber is alright until i align it again
 


HardBoiledEgg

1000 Post Club
Member ID
#7437
Messages
1,076
Likes
524
#5
When you adjust camber the toe needs to be reset


Any aligned shop can fix this. But that much camber is not bad
 


felopr

Senior Member
Member ID
#1762
Messages
825
Likes
376
#6
Here is the Fiesta suspesion specs

take it to an alignment shop
cant do anything about the rear camber but for the front you can use camber bolts to get to spec
 


OP
T
Member ID
#8109
Messages
22
Likes
1
Thread Starter #7
Yeah the rear is fine just the front is whats cambered it has camber plates im going to try to give it postive camber ill post a photo so you can see how bad it is
 




Top