FS: Schroth QuickFit Fiesta ST harness system

[codestp202]

For sale is my drivers side Schroth Racing QuickFit harness. Schroth advertises them for all Fiesta / ST models. This 4 point is DOT approved for the fiesta seats, and has Anti Submarining built into it.

If used correctly, they will provide (according to Schroth) more safety than the stock seatbelts. These are great because most stricter orgs only allow 4 points with ASM or harnesses built exactly for that model. I used these for a couple autocrosses and a few track days. I have gotten much faster and more into track days so I am moving onto a 6 pt and 4 point roll bar. These are perfect for autocross and track days and they come in and come out of the car in 1 minute. They hook up to all of the stock bolt points, and there is a document section on the Schroth site for install info. They are ready to go directly into a car and enjoyed. I will also include the ST harness pads.

The initial install is around 20 mins and all you need is a torx head and socket wrench.
They are in very good condition, no ripping, tearing, fraying.


https://www.schrothracing.com/products/quickfit#3366
They run $245 new + shipping.

I am asking $140 + shipping (most likely only 10-15 for the lower 48).

 

[slappy76]

PM'ed

For sale is my drivers side Schroth Racing QuickFit harness. Schroth advertises them for all Fiesta / ST models. This 4 point is DOT approved for the fiesta seats, and has Anti Submarining built into it.

If used correctly, they will provide (according to Schroth) more safety than the stock seatbelts. These are great because most stricter orgs only allow 4 points with ASM or harnesses built exactly for that model. I used these for a couple autocrosses and a few track days. I have gotten much faster and more into track days so I am moving onto a 6 pt and 4 point roll bar. These are perfect for autocross and track days and they come in and come out of the car in 1 minute. They hook up to all of the stock bolt points, and there is a document section on the Schroth site for install info. They are ready to go directly into a car and enjoyed. I will also include the ST harness pads.

The initial install is around 20 mins and all you need is a torx head and socket wrench.
They are in very good condition, no ripping, tearing, fraying.


https://www.schrothracing.com/products/quickfit#3366
They run $245 new + shipping.

I am asking $140 + shipping (most likely only 10-15 for the lower 48).

 

[codestp202]

PM'ed

Pm'd you back

 

[pianoman]

id like harness

 

[codestp202]

id like harness

Sale is pending a local pickup tonight by slappy76, if that falls through you are next up

 

[pianoman]

thnx

 

[Sprayed150]

Have these for my STX autocross car and they are great

 

[codestp202]

Sold to Slappy!

 

[slappy76]

Thanks again. Can't wait to get back home to try it.

Post up some pics of your new roll cage.

 

[Woods247]

I have one of these. It is OUTSTANDING on track.

Edit: I have the Pro version, so I can use my HANS. You can’t use a standard HANS with this particular harness but you CAN use a Simpson Hybrid S. The Hybrid S is pretty comfortable too.

 

[codestp202]

Thanks again. Can't wait to get back home to try it.

Post up some pics of your new roll cage.

Here's a starter pic, just got it installed yesterday. Will have some more comprehensive photos later when I get my 6 point installed

 

[Woods247]

Link to your cage info? I want that.

 

[pianoman]

cage info plz