Is the torque steer real?

Member ID
#9025
Messages
107
Likes
8
#1
I notice when I floor the pedal in lower gears, my wheels position is more firm, the wheels don't center out.
Like, if my wheels are aimed right, the car keeps going in that direction, or left, it continues that direction.
Usually torque steer pushes the car in one direction.
I'm just wondering if this torque steer is simulated, or why the car is acting up like this?
 


Plainrt

1000 Post Club
Member ID
#2159
Messages
1,386
Likes
688
#2
Welcome to a fwd car lol. The fist hardly does this imo compared to some others
 


Zormecteon

Active member
Member ID
#3860
Messages
607
Likes
426
#3
There are a couple of things going on in you "test". .. First, I see no listing of mods. If that is true, that you have a pure stock car, then---- Ford has done everything they can (for the price) to mitigate the problem. This includes limiting the power (in the form of capping boost pressure) in first and second gears where torque steer is most noticeable. Second, you mention that you are gripping the wheel firmly. That too will limit the reaction. If you want to see which direction the car wants to go, try holding loosely, or letting go of the wheel completely. I'm sure you can find it.
 


OP
M
Member ID
#9025
Messages
107
Likes
8
Thread Starter #4
Ow, no,
My Fist is totally stock.
I do get the issue in sports mode, so it seems like the overboost in lower gears does cause this more.

Also, I don't grip the wheel tightly.
I can let go of the steering wheel, and it would basically drive in circles, for as long as I'm accelerating; I'm guessing 1st to 3rd gear.
 


RubenZZZ

1000 Post Club
Member ID
#3975
Messages
1,454
Likes
926
#5
My dads old V6 Lumina sedan would almost rip the steering wheel from your hands if you accelerated quickly from stop in the rain. It would pull to the right and then you just sawed on their steering wheel trying to straighten it out.

Sent from my 2PYB2 using Tapatalk
 


me32

1000 Post Club
Member ID
#848
Messages
1,829
Likes
265
#6
Tq steer wouldn't actually be a real issue if from the factory it came with a real LSD or true/wave trac.

I wonder if there is much tq steer in the new euo ST.
 


Member ID
#200
Messages
170
Likes
41
#7
I have an MP215 tune, rear motor mount and Firestone Firehawk tires. I definitely have torque steer, which is to be expected. A LSD would be nice, but not planning to put that on at the moment.
 


XR650R

2000 Post Club
Member ID
#1371
Messages
2,769
Likes
3,239
#8
I finally put a RMM on mine, too. It's a lot less squirrely than before. Seems to track straighter and not wander so much when I punch it, but it's a FWD car. You'll always get a little.
 


alexrex20

1000 Post Club
Member ID
#7282
Messages
1,472
Likes
616
#9
If your wheels are pointed right, the car will go to the right and continue that direction until you point your wheels to the left.
 


OP
M
Member ID
#9025
Messages
107
Likes
8
Thread Starter #11
Yeah, it's not as much that the steering wheel pulls to the right or so,
More that the steering wheel seems glued in one direction.
It takes effort to actually center the steering wheel, to drive forward.
 


Member ID
#9584
Messages
25
Likes
11
#15
Are you sure a lot of this isn't the stability control doing it's thing? Is this happening with esc on or off?
 


Member ID
#7359
Messages
386
Likes
221
#16
It’s not just power and fwd. engineering explained on YouTube did a good video a while back about how Honda overcomes this. It’s worth a watch.
 


Member ID
#8337
Messages
45
Likes
9
#17
It's so disappointing when manufactures brag about eliminating torque steer. How neutered do they want FWDs to be...
 


Intuit

4000 Post Club
Member ID
#4881
Messages
4,098
Likes
2,632
#18
It has an open differential. If you're slipping one wheel more than the other (it doesn't take much) then it's going to self-steer.

Centrifugal forces during high RPM with the old rear-wheel drive small and big block engines would twist the front-end and bias one side. So even though it was rear wheel it would want to self-steer.

I'm not so sure that the forces we're observing are torque steer, versus tank steer. You can feel the wheel slip, but not any chassis twist. It's a 1.6L, not a 5.0L.
 


Similar threads



Top