Newbee Bonnie Scotland

[taxmanxxx1]

Hiya guys. Just purchased 2015 Fist in molten orange. Probably be bombarding you with questions as no familiar with the car yet. 😉
P.s Noticed o/s wheel arch liner is damaged so ordered a new one but can't for the life of me find the wee bit that connects it to the front end. Any help appreciated. Cheers Aaron

 

[Sam4]

this? OEM Fender Liner For 2011-2019 Ford Fiesta - should just snap in place until you secure with 'pushpin' screws and maybe 2 torx screws
Fender Liner Retainer Clip - Ford (W711035-S300)
Ford (W706169-S450B)

 

[D1JL]

​

Dave

 

[taxmanxxx1]

View attachment 64008
this? OEM Fender Liner For 2011-2019 Ford Fiesta - should just snap in place until you secure with 'pushpin' screws and maybe 2 torx screws
Fender Liner Retainer Clip - Ford (W711035-S300)
Ford (W706169-S450B)

Cheers Mate. I was thinking that it's the same as the N/S as that has a wee triangle rubber bit at the front. 👍

 

[taxmanxxx1]

Got picture of left with piece and right without the piece I need. Can't find it anywhere. Help me please, anyone! 😭

 

[SteveS]

Is it this
Molding Extension - Passenger Side (RH) - Ford (C1BZ-9910176-A)
or this
Molding Extension - Driver's Side (LH) - Ford (C1BZ-9910177-BB)

I found it under fender trim on the parts diagram

 

[XR650R]

That part should be common to any Fiesta hatch. Try calling around to salvage yards and find one off a wrecked car.

 

[taxmanxxx1]

Yep next plan was that mate. I'm sure the parts you've attached are for the skirt??

 

[SteveS]

I wasn't certain but on the parts diagram it seemed like they went in the same location you are referencing.

 

[Sam4]

Got picture of left with piece and right without the piece I need. Can't find it anywhere. Help me please, anyone! 😭

replaced it from Ford - right of left. Don't forget a screw...
C1BZ-9910176 (A)