Question about 4 x 100 wheels

[spdkills83]

Hello all, thinking about doing the 4 x 100 conversion and am just wondering when looking for 4 x 100 wheels do I need to look for ones that have our exact hub bore? Would I be able to get any hub bore and would just have source the rings for fitment?

Reason I ask is that typically when you buy a set of wheels say off tirerack for your specific car you get what you need for the install. If I were to buy a set of wheels off tirerack for example for another model vehicle with the 4x100 pattern would the hardware they send fit the fiesta?

Just trying to cover my bases before I spend any $$$.

Thanks for the help.

 

[jeffreylyon]

You'll have to use adaptors if the hub bore on your 4x100 is larger and will have to have the wheels machined if the hub more is smaller. I grabbed a set of adaptor rings off of eBay for < $15. That being said, 949 said that their wheels (at least the ones that I used) are not hub-centric and don't require adaptor rings.

 

[spdkills83]

Thanks good to know I was on the right track.

 

[wspec]

Or have your hubs machined. I had to take the 63.4 hub down to 63 to match the wheels.