ST-2 seat dimensions

[aabill]

Folks,

I'm in the process of refreshing / modernising the interior of my Fiesta Mk2 based kit car (photos attached for interest). I have the possibility of purchasing front and rear seats from a 2019 ST-2 and need to know whether they might be persuaded to fit. Would someone be kind enough to take a couple of measurements for me - the width of the rear seat base at it's widest point, the width of the rear seat back at the top and the bottom, the overall width of the front seat base at it's widest point, the width of the front seat back at the top, and the height of the seat from the floor to the top of the head restraint.

I would be very grateful indeed if someone could do the necessary with a tape measure. To within a centimeter / half an inch is fine.

Thank you so much
Bill

 

[Jabbit]

There are no ST-2/ST-x packages in the US. Can you post of picture of the seat you are interested in and perhaps it is the same USDM seat?

 

[aabill]

Here you go...
.

 

[XR650R]

All we got in the Americas was the Mk7. Isn't there a UK forum where people have the Mk8?
Cool car, BTW!

 

[Jabbit]

We didn't get those seats here. Ours look sorta close but not identical.

 

[aabill]

Guys thanks for your replies, useful to learn that the Mk8 didn't get to you even if negative info. Reason I tried here was because this forum has this busy section on Fiesta internals.

Stay safe and thanks again.

 

[XR650R]

Ford hates us Yanks. All they want to sell us are trucks and SUVs.

 

[M-Sport fan]

Ford hates us Yanks. All they want to sell us are trucks and SUVs.

At this point I would even accept a Puma ST, especially if it were a 'real' (NOT the FoRS type!) AWD version, but that will NEVER EVER happen.