TPMS remove from ignition cycle

[SwissLime]

I've put 100ish miles on a brand new set of wheels and tires that I ordered with new tpms sensors, and randomly out if nowhere my tpms light kicked on. I checked my tires and all were within a pound or two of where they should be, so I refilled them to their correct pressures and continued driving. It's been another 30 miles and I can't get the light to go away, in fact it flashes and stays lit after a short time. Does this indicate that I may need the sensors retrained?

Also side note, last time I started my car a message popped up about there being no tpms sensors and asked if I wanted to remove from ignition cycle and I clicked okay before thinking of taking pictures, good news is the light is gone now and my tires are currently filled correctly, but I'm concerned I may have disabled the alert from coming in should I need it.

 

[XR650R]

Take it back to where you got your wheels put on. They have a handheld deal that can revamp the sensors and make sure they're working.

 

[SteveS]

If you want to do it yourself, this is the tool: https://www.amazon.com/JDIAG-Progra...jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

 

[Sakel]

personally I was too lazy to swap my sensors from my old wheels, so I just turned off the system in forscan

 

[arryarvvy]

personally I was too lazy to swap my sensors from my old wheels, so I just turned off the system in forscan

I’ve been trying to turn off the alert on my ignition. How did you remove it?

 

[Sakel]

I’ve been trying to turn off the alert on my ignition. How did you remove it?

You have to have the correct adapter, but once you do you can follow these instructions to turn it off. https://www.fiestastforum.com/threads/forscan-settings-spreadsheet.19351/