whoosh motorsports short shift kit, trans bracket bushings, and shifter base bushings are here!

Trader history for ron@whoosh (1)

ron@whoosh

4000 Post Club
Vendor
Premium Account
Member ID
#5638
Messages
4,003
Likes
4,113
#1
They have landed !

We will offer them in kit form or individually
The kit and individual components will be priced VERY competitively

Short shifter made from billet aluminum (only 2 pieces) w/4 clamping bolts which are stainless steel.
There are 2 positions of throw adjustment 15% and 25%

Easy installation with simple hand tools

The Transmission bracket bushings are also billet aluminum as are the shifter base bushings (shown in BLACK)

We have a full set being final test fit and full install instructions being done for the forum this weekend. Parts will be up on the site immediately afterward.



 


Last edited:
Member ID
#7871
Messages
223
Likes
173
#2
Perfect timing as always Ron. I swear you go through our search history sometimes to see what our next mod is going to be.
 


OP
ron@whoosh

ron@whoosh

4000 Post Club
Vendor
Premium Account
Member ID
#5638
Messages
4,003
Likes
4,113
Member ID
#5650
Messages
19
Likes
8
#5
Wow! Looks great as usual Ron! When will the kit be available?
 


OP
ron@whoosh

ron@whoosh

4000 Post Club
Vendor
Premium Account
Member ID
#5638
Messages
4,003
Likes
4,113
Thread Starter #8
Member ID
#7294
Messages
38
Likes
33
#9
Hi Ron,

Looking forward to adding this to the list. Can I use the bushings with the Mountune shift kit that I already have installed and the Boomba shift lever that I will be adding in the future?
 


OP
ron@whoosh

ron@whoosh

4000 Post Club
Vendor
Premium Account
Member ID
#5638
Messages
4,003
Likes
4,113
Thread Starter #10
Hi Ron,

Looking forward to adding this to the list. Can I use the bushings with the Mountune shift kit that I already have installed and the Boomba shift lever that I will be adding in the future?
absolutlely
these parts can be used with any other parts that are already on the market
 


danbfree

3000 Post Club
Member ID
#8529
Messages
3,510
Likes
1,203
#11
"Easy install in 10-15 minutes"

Maybe if you are fully familiar with everything under the hood and how to get to the linkage connection quickly... Took me an hour easy just for a very similar shift plate install: With the newer FiST's having beefier battery cables and whatnot, I had to disconnect stuff and pull battery box out of the way and had never done all that before... so just a warning to fellow amateur wrencher's out there, LOL... But once you are in there the trans bracket bushings would literally add just a minute or two.

Great little package, Ron! I highly recommend not only this mod in general but at a great package deal through Ron here!
 


OP
ron@whoosh

ron@whoosh

4000 Post Club
Vendor
Premium Account
Member ID
#5638
Messages
4,003
Likes
4,113
Thread Starter #12
"Easy install in 10-15 minutes"

Maybe if you are fully familiar with everything under the hood and how to get to the linkage connection quickly... Took me an hour easy just for a very similar shift plate install: With the newer FiST's having beefier battery cables and whatnot, I had to disconnect stuff and pull battery box out of the way and had never done all that before... so just a warning to fellow amateur wrencher's out there, LOL... But once you are in there the trans bracket bushings would literally add just a minute or two.

Great little package, Ron! I highly recommend not only this mod in general but at a great package deal through Ron here!
changed it to be more "general"
 


Member ID
#7470
Messages
157
Likes
35
#17
Also Ron, this kit is amazing, I was skeptical at first, but WOW, its awesome.
 


Member ID
#4049
Messages
159
Likes
59
#18
What will the bushings actually do? I love my short shift, but have not done some of the other "required" mods because they are more show than go.

Sent from my VS986 using Tapatalk
 


danbfree

3000 Post Club
Member ID
#8529
Messages
3,510
Likes
1,203
#19
What will the bushings actually do? I love my short shift, but have not done some of the other "required" mods because they are more show than go.
Bushings can help with shift feel and possibly help a bit with shift clack... not any clunk, but the actual shift clack that you can get especially in 3rd and 4th...
 


Member ID
#7470
Messages
157
Likes
35
#20
Might be some placebo but for sure the shifts feel more solid and positive.

Sent from my SM-G960W using Tapatalk
 




Top