Which 3 inch exhaust has the least drone?

[Based]

I know with 3" exhausts it's kind of unavoidable to have some sort of drone but I'm wondering which one has the least drone. Is it the Nexxus?

[Hijinx]

The one you like best... But, seriously, it's pretty subjective. I have the aluminized MBRP, and I don't get any drone. I've been told/read that cp-e doesn't drone, and sooner or later DHM will have their lightweight aluminum exhaust with no drone.

[Woods247]

I read the same about cp-e. I bought one with
and it drones like crazy on the hwy at 3k rpm. Its actually difficult to talk via blue tooth.

[Based]

The one you like best... But, seriously, it's pretty subjective. I have the aluminized MBRP, and I don't get any drone. I've been told/read that cp-e doesn't drone, and sooner or later DHM will have their lightweight aluminum exhaust with no drone.

Is DHM really making an exhaust?

[M-Sport fan]

Is DHM really making an exhaust?

I've asked MANY times about this with no response.

I may have heard somewhere on here that if/when they do, it will be as much as, if not a little more than what the Tomei titanium (IF it is ever released, and a BIG IF at that, it seems) is projected to cost, but could be a little bit lighter yet.

[Hijinx]

Is DHM really making an exhaust?

To be clear and precise: There is, at least, one in existence.

I can't say DHM WILL without a doubt go into production, because I don't know that. I just know one exists. My previous post contains poor word choices. Instead of "DHM will have," I should have said "DHM may have" or something similar to the latter. My apologies if I caused any confusion.

[Based]

To be clear and precise: There is, at least, one in existence.

I can't say DHM WILL without a doubt go into production, because I don't know that. I just know one exists. My previous post contains poor word choices. Instead of "DHM will have," I should have said "DHM may have" or something similar to the latter. My apologies if I caused any confusion.

Man I was going to get something for myself this Christmas but I guess I will wait. The CPE intake is not available for 2016 Fiesta ST's, and now I want to wait to see if DHM will make a crazy good exhaust.

[awwwww_shift]

Bringing this up from the basement.

I have an Ultimate Racing 3".
http://www.ultimate-racing.com/colle...atback-exhaust

Good quality piece, with no drone at standard cruising speeds. My setup has the resonator option, and the 3" turndown. Good looking welds, and a good polish to it.

Just my $.02

[92FOX]

Bringing this up from the basement.

I have an Ultimate Racing 3".
http://www.ultimate-racing.com/colle...atback-exhaust

Good quality piece, with no drone at standard cruising speeds. My setup has the resonator option, and the 3" turndown. Good looking welds, and a good polish to it.

Just my $.02

Never heard of the company, but looks like a nice piece. $850 is steep though...

[92FOX]

Bringing this up from the basement.

I have an Ultimate Racing 3".
http://www.ultimate-racing.com/colle...atback-exhaust

Good quality piece, with no drone at standard cruising speeds. My setup has the resonator option, and the 3" turndown. Good looking welds, and a good polish to it.

Just my $.02

Never heard of the company, but looks like a nice piece. $850 is steep though...