PumaSpeed X-47 Hybrid Turbo Thread

How many have purchased / installed / tuned the x-47 Hybrid Turbo?

  • X-47 Purchased

    Votes: 53 74.6%
  • X-47 Installed

    Votes: 18 25.4%
  • X-47 Tuned

    Votes: 12 16.9%
  • X-47 Dyno / V-Dyno Results

    Votes: 8 11.3%

  • Total voters
    71
Member ID
#6331
Messages
129
Likes
13


I have tune dialed in I just need to work on the 60' foot. It's just hard on street tires.


Sent from my iPhone using Tapatalk
 


LILIKE16ST

Senior Member
Member ID
#4479
Messages
862
Likes
252


I have tune dialed in I just need to work on the 60' foot. It's just hard on street tires.


Sent from my iPhone using Tapatalk
That is a very solid time and with this kind of power on street tires with a small car front wheel drive 2.2 really isn't that bad honestly. I'm sure it can be improved upon but not by a whole lot a 2.0 may be possible. I did a 2.3 on my one and only run with stock turbo 93 tune only but I forgot and left traction control on like an idiot and while the car didn't spin any it bogged like crazy off the line and that was responsible for the 2.3+ 60. If I could get it down to a 2.0 and run without a passenger I could probably turn that 14.7 into a 14.3-14.4 or better pretty easily. I plan to switch to an e30 tune from Stratified before the season opens again and get a cpe Intake with big mouth snorkel and hope for real low 14s or high 13s if I can work on that 60. Car is down close to 2600 lbs as she sits with the ac all speakers and seats and stuff still in place nothing major. It's a base car with around 110 or so lbs removed (that's taking into account the 9 lbs heavier fmic from depo). That will do me until the turbo upgrade comes within the next couple of years. X47 it is unless I find an unbeatable deal on a x37.
 


BronxBomber

1000 Post Club
Member ID
#2901
Messages
1,002
Likes
226


I have tune dialed in I just need to work on the 60' foot. It's just hard on street tires.


Sent from my iPhone using Tapatalk
Who tuned you and can you post mod list? Thanks[loveboost]
 


Member ID
#6331
Messages
129
Likes
13
Who tuned you and can you post mod list? Thanks[loveboost]
I am tuned by Alex at Stratified Auto Control. He did a 93 tune and a e60 tune for me. This pass was on the e60 tune and we have been working on it for over three months but it is worth it! As far as mods here we go no back seat, spare tire or jack, cobb dp, MBRP catback, fswerks intake, boomba intake spacer, one step colder ngk plugs, fswerks short throw shifter, mishimoto charge pipes and intercooler, X47 turbo, Stratified Aux fuel, 16x7 sparco green wheels and 205/40r16 Hankook rs4 tires. When I made this pass I did a small burn out, tires @ 28 psi and I flat foot shifted at 6600.
 


Member ID
#6331
Messages
129
Likes
13
I am sure I am for getting something LOL but that is the main stuff
 


Member ID
#3419
Messages
201
Likes
30
Do you have a V-Dyno? I would love to see the graph of an E60 tune.
 


LILIKE16ST

Senior Member
Member ID
#4479
Messages
862
Likes
252
I am tuned by Alex at Stratified Auto Control. He did a 93 tune and a e60 tune for me. This pass was on the e60 tune and we have been working on it for over three months but it is worth it! As far as mods here we go no back seat, spare tire or jack, cobb dp, MBRP catback, fswerks intake, boomba intake spacer, one step colder ngk plugs, fswerks short throw shifter, mishimoto charge pipes and intercooler, X47 turbo, Stratified Aux fuel, 16x7 sparco green wheels and 205/40r16 Hankook rs4 tires. When I made this pass I did a small burn out, tires @ 28 psi and I flat foot shifted at 6600.
Those 205/40 in the 16 is around an inch shorter than the stock setup so that would make your gearing even steeper than it was originally. Can you cross the traps in 4th at 113 mph? I'm sure shifting higher helps some on that but it would seem with steeper gearing than stock 113 would be really pushing it towards the end of 4th even with a higher redline. I was just curious. That is an awesome trap speed man 113 is moving on for a hybrid imo no matter the fuel at the end of the day this is still a tiny motor and a tiny turbo very impressive.
 


Member ID
#6331
Messages
129
Likes
13
Do you have a V-Dyno? I would love to see the graph of an E60 tune.


This was two revisions ago just don't have a up to date one. I was on E50 at this time, But was having a little knock on cylinder 1 so we went to e 60



Sent from my iPhone using Tapatalk
 


Member ID
#6331
Messages
129
Likes
13
Those 205/40 in the 16 is around an inch shorter than the stock setup so that would make your gearing even steeper than it was originally. Can you cross the traps in 4th at 113 mph? I'm sure shifting higher helps some on that but it would seem with steeper gearing than stock 113 would be really pushing it towards the end of 4th even with a higher redline. I was just curious. That is an awesome trap speed man 113 is moving on for a hybrid imo no matter the fuel at the end of the day this is still a tiny motor and a tiny turbo very impressive.
That is a good point. I know from data logs that I did 123 in fourth when I was running a 215/45r17. So I think I could. I am going to try and hold fourth next time and see what happens. I just got the ok for Alex that I am done on my e tune. Here is what he sent me.



Sent from my iPhone using Tapatalk
 


Member ID
#6331
Messages
129
Likes
13
I was hoping for 140 in the half but I don't think 133.6 is bad. Is it?


Sent from my iPhone using Tapatalk
 


Member ID
#5247
Messages
9
Likes
1
Just had my car tuned with the x47r. Being limited to 90 octane here in AK is very shitty :( This is with Puma's quickspool manifold. Needless to say, WMI will be incredibly beneficial for the octane boost.

 


Member ID
#6331
Messages
129
Likes
13
Just had my car tuned with the x47r. Being limited to 90 octane here in AK is very shitty :( This is with Puma's quickspool manifold. Needless to say, WMI will be incredibly beneficial for the octane boost.


That is still pretty good for 90 oct and on a mustang dyno. Who tuned it for you?
 


Member ID
#5247
Messages
9
Likes
1
That is still pretty good for 90 oct and on a mustang dyno. Who tuned it for you?
His name is Seth, the owner of P3IA in Wasilla, AK. Great guy, I'll be doing my entire build through him.
 


Member ID
#1862
Messages
255
Likes
29
Went back to 93 Octane for the winter here in Ohio....man I miss e30! It's just missing that little extra oomph now
 


Member ID
#6719
Messages
47
Likes
15
Anyone know if the lp3r (Laird performance) kit are available in the US? Or anyone has it in here?
 


pelotonracer2

1000 Post Club
Member ID
#517
Messages
1,437
Likes
315
Enjoyed reading this whole thread.... will have my X47R installed next week.
 




Top