Exhaust trying to take flight

[Rocketst]

So as the post says I seemed to adjust the thermal very wrong and it's headed for the sky. Attached is a picture. Any suggestions to get it to point down? And before you ask, yes that bumper is melted lol

Sent from my moto z4 using Tapatalk

 

[TyphoonFiST]

So as the post says I seemed to adjust the thermal very wrong and it's headed for the sky. Attached is a picture. Any suggestions to get it to point down? And before you ask, yes that bumper is melted lol

Sent from my moto z4 using Tapatalk

Holy Shit! How did this happen? I have a thermal and its close to the valance but never that close!

Sent from my SM-N975U1 using Tapatalk

 

[Hypergram]

My Mountune exhaust was very close the to the bumper when installed it. Welding extensions to the exhaust arms as well as bigger exhaust hangers. RIP your bumper tho

 

[flbchbm]

SO sorry....ugh, the worst. Junkyard bumper/valance in the future. It looks like one of the joints was/is loose. I'm not sure on that brand, but my Borla will point up until it is clamped down bc of the joint location.

 

[Rocketst]

So I remembered I went over a very large rock I couldn't avoid this morning. I checked under the car for damage right after but couldn't find any. Pretty sure this was the extent of it... Cuz it was nowhere near this bad before.

Sent from my moto z4 using Tapatalk

 

[Rocketst]

I'm not too concerned... I had plans to either do a body kit at the most or at the least get all the panels fixed or replaced and do a show car finish on the paint. Just one of those things that's gonna need to be replaced now.

Sent from my moto z4 using Tapatalk

 

[PunkST]

Some accidental bosozuku. Lol

 

[the duke]

Longer mounts will help. Especially the 2 closest to the rear bumper. They're a rather inflexible Polyuethane and won't allow much movement (Vertical at least)

https://www.torquesolution.com/Exhaust-Mount-s/1239.htm