Lets talk aftermarket shift knobs...

A

acSlayt0r

Member
#41
Member ID
#10338
Messages
39
Likes
13
#41
FocusedSlayer said:
That's like the 1 that I found in Lithuania and it's finally made it to the states after traveling across country last week. Just checked and it's in Atlanta so hopefully I"ll have mine in the next day or 2.
Click to expand...
Yup that's the one. It compliments the interior nicely!
 


TemecFist

TemecFist

Active member
#44
Member ID
#8885
Messages
777
Likes
617
#44
MagSt said:

I’m running my battlecraft teardrop on a latheworks extension. The lathe works extension is great quality just be patient for it to come in mine took around 5 weeks.



Sent from my iPhone using Tapatalk
Click to expand...
How long is that extension?
 


F

FiST_MK

Member
#45
Member ID
#24724
Messages
12
Likes
13
#45
TemecFist said:
How long is that extension?
Click to expand...
I’d like to add my setup, I referenced the info here for my setup, so I’d like to post mine for reference.

Amazon shift extender, 3.75”
I first tried it with stock knob and a washer ground down to make sure I don’t hate it;
3795CE10-59DB-4F95-AF2C-DF40140A7A8A.jpeg
1EAA56F7-4E42-4431-ABBA-6D45EA5F8100.jpeg
CJbPony shift knob and reverse lockout adapter from member classified’s;
7C496A73-86E1-4630-A600-30BC32F083A3.jpeg
 


S

sullybosco

Member
#46
Member ID
#31526
Messages
32
Likes
3
#46
DangerMouse said:
Sort of. It's the same thread pitch but the reverse lockout for subaru is a smaller diameter than the st/rs.

You need an adapter or extension that fits the reverse lockout then you can use any 12x1.25 knob.

I have an eBay reverse lockout adapter and twm extension topped with cobb sti knob.

This was before WC Lathe Werks was making adapter/extensions for pommeau de vitesse 208.

I will be ordering a new extension from him and I'm really liking the titanium but I can't justify the cost just yet.

He also started making reverse lockouts too!
Click to expand...
You can use a Subaru WRX reverse lockout adapter. Many people have had success with them on the Clio 3. Look for ones compatible with M12x1.25 thread pitch like Perrin or Kartboy. They allow you to run a non reverse lockout knob while keeping reverse functionality. Just make sure the adapter sits flush and does not interfere with gear changes. Plenty of WRX style knobs like Raceseng, Mishimoto, or Skunk2 fit well with this setup. 4.1-mini
 


You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
Fusion Works Lets talk Spring Load, Not the usual Spring Rate thread Suspension, Brakes & Chassis 134
Intuit GUIDE: Amp Remote Turn-On + Relay 12v Outlets ⚡ Audio-Video, Electronics, Sync & MyFord Touch 14
CSM Lets talk camber - How much camber are you running? Fiesta ST Tracking, Autocrossing & Dragstrip 10
PunkST Lets hope this works. Maintenance, Warranty Issues & Troubleshooting 6
J Lets talk wastegate and actuators Dizzy Tuning 17
psiaddict1 New Mexico Area Fiesta ST Group - Lets get this started! South West Fiesta ST Owners 52
K Lets Talk Raising the 1.6 EcoBoost Redline EcoBoost Engine Upgrades 20
Sourskittle Supplemental fuel systems, LETS GO !! EcoBoost Engine Upgrades 16
Sourskittle I admit it.. I'm a tool slut. Lets see your tool setups !! General Automotive Discussions 16
2 Lets see your guys forum decals General Automotive Discussions 7

Similar threads

Ford Community Posts



Top