Hey guys. I have here some common wiring information that'll help out with potential audio upgrades.
Radio 12V+ (Constant): yellow/red
Radio Ground: black/blue
Radio Ignition: (CANBUS) Radio turns on through computer
Power Antenna: (+)black
Left Front Speaker: (+)white ~ (-)white/brown
Left Front Tweeter: (+)green/orange ~ (-)gray/orange
Right Front Speaker: (+)white/violet ~ (-)white/orange
Right Front Tweeter: (+)violet/orange ~ (-)yellow/orange
Left Rear Speaker: (+)white/green ~ (-)brown/yellow
Right Rear Speaker: (+)brown/white ~ (-)brown/blue
RSE Video (rearview camera video): (+)white/green ~ (-)brown/violet
AUX Right(+): blue/green
AUX Left(+): blue
AUX Ground: yellow/green
AUX Shield: black
Satellite Radio 12v: Integrated into the factory radio
RAP 30amp (retained accessory power): brown/blue ~ Located behind the driver kick panel going into the driver door.
Reverse trigger: blue ~ Located in the driver kick panel or at the BCM in a gray 24 pin plug in pin 7.
High Speed CANBUS High: white/blue
High Speed CANBUS low: white
Medium Speed CANBUS High: gray/orange
Medium Speed CANBUS Low: violet/orange
No reason to have anything out of phase now! If anything else is needed, or if anything is incorrect let me know.
Radio 12V+ (Constant): yellow/red
Radio Ground: black/blue
Radio Ignition: (CANBUS) Radio turns on through computer
Power Antenna: (+)black
Left Front Speaker: (+)white ~ (-)white/brown
Left Front Tweeter: (+)green/orange ~ (-)gray/orange
Right Front Speaker: (+)white/violet ~ (-)white/orange
Right Front Tweeter: (+)violet/orange ~ (-)yellow/orange
Left Rear Speaker: (+)white/green ~ (-)brown/yellow
Right Rear Speaker: (+)brown/white ~ (-)brown/blue
RSE Video (rearview camera video): (+)white/green ~ (-)brown/violet
AUX Right(+): blue/green
AUX Left(+): blue
AUX Ground: yellow/green
AUX Shield: black
Satellite Radio 12v: Integrated into the factory radio
RAP 30amp (retained accessory power): brown/blue ~ Located behind the driver kick panel going into the driver door.
Reverse trigger: blue ~ Located in the driver kick panel or at the BCM in a gray 24 pin plug in pin 7.
High Speed CANBUS High: white/blue
High Speed CANBUS low: white
Medium Speed CANBUS High: gray/orange
Medium Speed CANBUS Low: violet/orange
No reason to have anything out of phase now! If anything else is needed, or if anything is incorrect let me know.