Intercooler charge pipe full kit Hot and Cold - $199.95 Free shipping

[Depo Racing]

Depo Racing Ford Fiesta ST Intercooler pipe kit . This kit replaces the smaller stock hoses. Much larger flow space, smoother flow.

? 2.5? OEM grade (2mm) Aluminum Intake pipe Hot and Cold pipe

? Perfect fitment and tight seal

? Comes with Couplers and T-Bolt Clamps

? Mounts to stock intercooler and most aftermarket brands.

- See more at: http://www.deporacing.us/shop/ford/...tercooler-pipe-kit-copy/#sthash.uAQ10Fmd.dpuf

 

[trahma]

of course this gets posted a few minutes after I order my intercooler

 

[trahma]

I've seen the bracket off of the pipe break in a few images posted while researching charge pipes. Is there anything in particular you've done to strengthen that or is there a warranty of any sort?

 

[Depo Racing]

its welded strong, if you install it correctly without putting to much tension in either direction I think most would be fine. lay out the pipes and couplers and tbolts at 80% tight before tightening them down fully and the install comes out great.

 

[jdubs]

Just another thing to add to my list of wants. Thanks a lot!

 

[FistSt215]

Will be getting this soon as well. Love the Depo IC and will be having the DP and mbrp exhaust installed soon

 

[FistSt215]

Just order the charge pipe kit!!! I'm all Depo out in Boltons besides the intake and cbe lol. Do you have any Depo stickers ?? Lol

 

[WeTheNorth]

Faaak, another purchase I will have to make. Just spend some big bucks on my CBE or else this would have been bought!

 

[Bluedrank]

Quick question about these pipes. What was the reason behind making the cold side pipe just the elbow part? I see that cobb and mountune basically did this, whereas mishimoto recently came out with a cold side pipe that is the full length. Just curious as to what the reasoning behind not doing the full pipe would be.

 

[FistSt215]

Mine should be arriving today . Don't know when it will be installed . Have depo charge pipes , boomba wing risers and dhm SSD to installed when I have the free time

 

[LilPartyBox]

Mine too! I'll slap it all together Saturday.

 

[FistSt215]

Sent from my iPhone using Tapatalk

 

[airjor13]

Will you sell just the cold-side pipe?

 

[WeTheNorth]

How does the quality look??
Anyone install this kit , yet?

Obviously you kno I'm interested, Depo ftw

 

[Jesse]

Any way you can sell this whole set with intercooler?

 

[Depo Racing]

probably not as I don't have the intercooler in stock.

 

[LilPartyBox]

How does the quality look??
Anyone install this kit , yet?

Obviously you kno I'm interested, Depo ftw

A few have installed it. But I'm installing the IC and pipes this weekend. I'll take pics during the install. Stay tuned

 

[FistSt215]

I wanted to wait for the charge pipes to do them together with the bumper off . I recalled a member installed the charge pipes on ramps without removing the bumper

 

[FistSt215]

Installed the hot side pipe today which was actually pretty easy a little time consuming took about hr to do. As for the cold side pipe which would probably be the easiest out of the two but one problem. When I did my Depo IC I should had been smart and face the clamp towards me when I'm under the car . The hose that connects to the inlet I can't get it to it because it's face towards the front . This was all done on a ramp btw because I don't want to take the bumper off again. I'm thinking if I can just yank it off lol . Here are some pics under the car



Sent from my iPhone using Tapatalk

 

[FistSt215]

Apparently it wasn't tighten as much as I thought . Went for a driving and hear a whistling sound it was only boosting 16 pounds 1/2 throttle . Went to get it on it a little more and heard something pop. No boost so I baby it home which I was only a 1/2 mile if that to my house . I pull it in the driveway and put her back on the ramps tomorrow morning .